ARCHIVES OF ELECTRICAL ENGINEERING (AEE) (previously Archiwum Elektrotechniki), quarterly journal of the Polish Academy of Sciences is OpenAccess, publishing original scientific articles and short communiques from all branches of Electrical Power Engineering exclusively in English. The main fields of interest are related to the theory & engineering of the components of an electrical power system: switching devices, arresters, reactors, conductors, etc. together with basic questions of their insulation, ampacity, switching capability etc.; electrical machines and transformers; modelling & calculation of circuits; electrical & magnetic fields problems; electromagnetic compatibility; control problems; power electronics; electrical power engineering; nondestructive testing & nondestructive evaluation.,
All manuscripts should be submitted electronically on Editorial
Submission of paper to the Archives of Electrical Engineering
understood to imply that the article is original, unpublished and is not
being considered for publication elsewhere. All articles will be reviewed.
Since 2013, Authors wishing to use the facility of colour printing should
consult the editors.,
Microsoft Word is recommended as a standard word processor to prepare
the paper to the AEE journal. If you use the LaTex format, please
transfer your document to Microsoft Word and then use Template AEE.
While editing your paper, make sure that all the mathematical characters
(symbols, identifiers, variables, vectors, axis marks, etc.) have the
required shape, thickness, and slant kept throughout the whole article.
The same appearance of a given mathematic character must be retained
regardless of its place (text, equations, tables or figures).
The articles that don’t conform to the above will not be processed and
The reviewing process:
Each paper submitted for publication in Archives of Electrical
Engineering is subjected to the following review procedure:
paper is reviewed by the editor in chief or guest editor for general
suitability for publication in AEE
b) if it is judged suitable two
reviewers are selected and a double blind peer review process takes place
based on the recommendations of the reviewers, the editor then decides
whether the paper should be accepted in its present form, revised or
d) the author(s) is(are) informed by e-mail on the results
of the reviewing procedure.
The papers are published on average
within 3 months after acceptance.
Requirements for preparation of manuscripts:
The manuscripts submitted for publication should not exceed 21 000
characters (ca. 12 pages of a manuscript written on an A4 sheet in Times
New Roman, 10pt font size, single line spacing and 3.8 cm margins). The
manuscripts, written in UK English, should be typed using Template
AEE according to the following instructions and should include: a
title page with the title of a manuscript, a short title; abstract; key
words, text; list of references. A DOI number as well as received and
revised data will be completed by Editor. When you open Template.doc,
select "Print Layout" from the "View" menu in the menu bar (View > Print
Layout). Then type over sections of Template.doc
or cut and paste from another document and then use markup styles (Home
> Styles). For example, the style at this point in the document is "main
All papers submitted for publication are assessed on the basis of the
mutual anonymity rule as to the names of reviewers and authors. Authors'
names and affiliations should not appear in the attached
If English is not your first language, ask an English-speaking colleague
to proofread your manuscript. The manuscripts that fail to meet basic
standards of literacy are likely to be immediately declined or after the
language assessment, sent to the authors for linguistic improvement.
The manuscripts are published on average within 3 months after their
Do not change the font sizes or line spacing to squeeze more text
into a limited number of pages. Leave some open space around your
The AEE journal publishes an ORCID for all authors. You will need a
registered ORCID in order to submit your paper for peer review. ORCID registration
is free and only takes a minute. Please note that ORCIDs will be added
in the course of the author's proofreads.
The pages must be numbered consecutively. Articles should be divided into numbered sections, and if necessary subsections, preferably: Introduction, Material, Methods, Results, Conclusion and References. Any special characters (e.g. Greek, script, etc.) should be named in the margin where the character first occurs in the text. Names of species are to be accentuated with wavy underlining (italics). Equations should be numbered serially (1), (2), ... on the right side of the page. Footnotes should be avoided, if required, they should be used only for brief notes which do not fit well into the text. Figures and tables have to be included into the text. If table is typed on a separate page its position in the text should be marked. Abbreviations should be explained when they first appear in the text.,
Please use the Microsoft Equation 3.0 editor (comes with
Microsoft Office 2007 and later versions) or the MathML editor as
well as MathType editor to build an equation in your manuscript.
insert an equation in Word, choose Insert, then Object. This will bring
up a dropdown menu, where the Object option should be chosen again.
Pressing it opens a popup window, where the Create New option has to be
clicked. Scrolling down the window allows to find Microsoft Equation 3.0.
Equations should be typed within the text, centred, and should be numbered consecutively throughout the text. Their numbers should be typed in parentheses, flush right. Equations should be referred to in text, e.g. (1), except at the beginning of a sentence: "Equation (1) is ...". All symbols appearing in equations have to be defined in the text, before or just after the equation.
If the symbols are written in Times New Roman use italic fonts. Symbols of vectors and matrices should be written in bold fonts. Do not italicize Greek fonts and mathematical symbols like e.g.: the derivative symbol d, max, min, etc. The indices of symbols that are indices themselves should be written in a clear manner.
Note that the equation is centered using a center tab stop. Please keep the same font in the formulas and text.,
Unit Symbols, Abbreviations:
Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.
Si units are recommended for use in formulas, drawings and tables., for example the SI unit for magnetic field strength H is A/m. Apply the center dot to separate compound units.
Do not mix complete spellings and abbreviations of units: "Wb/m2" or "webers per square meter," not "webers/m2." Spell units when they appear in text: "...a few henries…", not "...a few H…".
Use a zero before decimal points: "0.25," not ".25." Use "cm3," not "cc."
Unit Symbols, SI Prefixes as well as Abbreviations should be writing in accordance with the IEEE standard,
Tables, figures (illustrations) and captions:
The illustrations (line diagrams and photographs) should be suitable for direct reproduction. The lettering as well the details should have proportional dimensions to maintain their legibility after the usual reduction. All illustrations should be numbered consecutively (Fig. X). Tables are numbered with Arabic numerals.
All figures, figure captions, and tables in the text must be inserted into the correct places.
Figures, photos, tables or other parts of a manuscript that have previously appeared in another publication or are not the property of the authors must be properly acknowledged in the manuscript. Permission to republish these items must be obtained by the corresponding author from a person or institution holding the copyright, usually the publisher.
Authors are requested to send figures (diagrams, line drawings and photographic images) in separate computer files. JPG, PNG or TIF are the recommended file formats. Photographs, colour and greyscale figures should be at least at a resolution of 400dpi. Linear, including tables should be at a minimum of 600dpi.
All colour figures should be generated in the RGB or CMYK colour space, while greyscale images in the greyscale colour space.
When preparing your figures/graphics etc., we suggest the use of the Arial 8 point font for axis numbers and Arial 9 point font for axis names. Figures/graphics etc. can be prepared in one of two proposed ways - see Template AEE.
Tables are numbered with Arabic numerals. Use 9 point Times New Roman for the title of the table and 9 point Times New Roman for the filling of the table (9 in the case of symbols with subscripts).
AEE journal allows an author to publish color figures in e-version at no charge, and automatically convert them to grayscale for print versions. Authors wishing to use the facility of color printing should consult the editors.,
A conclusion might elaborate on the importance of the work or suggest applications and extensions. Although a conclusion may review the main points of the manuscript, do not replicate the abstract as the conclusion.,
References in text must be numbered consecutively by Arabic numerals
placed in square brackets. Please make sure that you use full names of
journals i.e. Archives of Electrical Engineering. Please ensure that all
references in the Reference list are cited in the text and vice versa.
provide name(s) and initials of author(s), the title of the manuscript,
editors (if any), the title of the journal or book, a volume number, the
page range, and finally the year of publication in brackets.
can use the rules presented on the site: IEEE
Examples of the ways in which references
should be cited are given below:
Author1 A., Author2 A., Title of paper, Title of periodical, vol.
x, no. x, pp. xxx-xxx (YEAR).
 Steentjes S., von
Pfingsten G., Hombitzer M., Hameyer K., Iron-loss model with
consideration of minor loops applied to FE-simulations of electrical
machines, IEEE Transactions on Magnetics. vol. 49, no. 7, pp.
 Idziak P., Computer Investigation of
Diagnostic Signals in Dynamic Torque of Damaged Induction Motor,
Electrical Review (in Polish), to be published.
 Cardwell W., Finite
element analysis of transient electromagnetic-thermal phenomena in a
squirrel cage motor, submitted for publication in IEEE Transactions
 Author A., Title
of conference paper, Unabbreviated Name of Conf., City of Conf.,
Country of Conf., pp. xxx-xxx (YEAR).
M., Staton D.A., Thermal aspects in power traction motors with
permanent magnets, Proceedings of XXIII Symposium Electromagnetic
Phenomena in Nonlinear Circuits, Pilsen, Czech Republic, pp. 35-36
Book, book chapter and manual
 Author1 A.,
Author2 A.B., Title of book, Name of the publisher (YEAR).
Zienkiewicz O., Taylor R.L., Finite Element method, McGraw-Hill
Book Company (2000).
 Author1 A., Author2
A., Title of patent, European Patent, EP xxx xxx (YEAR).
Piech Z., Szelag W., Elevator brake with magneto-rheological fluid,
European Patent, EP 2 197 774 B1 (2011).
Author A., Title of thesis, PhD Thesis, Department, University,
City of Univ. (YEAR).
 Driesen J., Coupled
electromagnetic-thermal problems in electrical energy transducers,
PhD Thesis, Faculty of Applied Science, K.U. Leuven, Leuven (2000).
on electronic forms
 Author A., Title of article, in
[Title of Conference, record as it appears on the copyright page], ©
[applicable copyright holder of the Conference Record] (copyright year),
doi: [DOI number].
 Kubo M., Yamamoto Y., Kondo
T., Rajashekara K., Zhu B., Zero-sequence current suppression for
open-end winding induction motor drive with resonant controller,in
IEEE Applied Power Electronics Conference and Exposition (APEC), © APEC
(2016), doi: 10.1109/APEC.2016.7468259
http://www.aee.put.poznan.pl, accessed April 2010.
Authors will receive proofs for correction, which should be returned promptly. All joint contributions must indicate the name and address of the authors to whom proofs should be sent.,
Fees for printing the papers in Archives of Electrical
AEE is published in Open Access, which means that all articles are
available on the internet to all users immediately upon publication free
of charge for the readers. Authors will be asked to a declaration that
they are ready to cover the costs of printing their article.
fee for the publication of an article in the AEE journal is 200 Euro.
Abstracting & Indexing:
Archives of Electrical Engineering is covered by the following services:
CNKI Scholar (China National Knowledge Infrastucture)
EBSCO - TOC Premier
EBSCO (relevant databases)
EBSCO Discovery Service
Elsevier - Compendex
Elsevier - Engineering Village
Elsevier - SCOPUS
ICI Journals Master List
Primo Central (ExLibris)
ProQuest - Advanced Technologies Database with Aerospace
ProQuest - Electronics and Communications Abstracts
ProQuest - Engineering Journals
ProQuest - High Tech Research Database
ProQuest - Illustrata: Technology
ProQuest - SciTech Journals
ProQuest - Technology Journals
ProQuest - Technology Research Database
Summon (Serials Solutions/ProQuest)
TEMA Technik und Management
Thomson Reuters - Emerging Sources Citation Index
Ulrich's Periodicals Directory/ulrichsweb