The article discusses the book Zmiana perspektywy. Gawęda nie tylko językoznawcza [Change of perspective. More than a tale of linguistics] by Zuzanna Topolińska (Cracow 2015). The author of this text emphasizes that the word gawęda [tale] in the book’s subtitle is misleading, given that, despite the style of language used in the book, Topolińska discusses important issues of a linguistic and intercultural nature. In her short essays in the fi rst part of the book Topolińska addresses the organizational structure of philology studies in Poland and Macedonia, she confronts the Polish and Macedonian approach to the dialectgeneral language relationship, she talks about language standards, about the differences between politeness in Poland and Macedonia, as well as the attitude towards women and the outlook toward religion in both countries. In the second part of the book Topolińska takes up lexical issues, giving examples of how under the infl uence of spiritual culture certain words in Polish and Macedonian that derive from the same core have taken on a different meaning. The author of the article concludes that this short and very personal book by Topolińska fulfi lls its task and subsequently alters his view on the linguistic and non-linguistic world of the Slavs.
Abstract In the paper a state filtration in a decentralized discrete time Linear Quadratic Gaussian problem formulated for a multisensor system is considered. Local optimal control laws depend on global state estimates and are calculated by each node. In a classical centralized information pattern the global state estimators use measurements data from all nodes. In a decentralized system the global state estimates are computed at each node using local state estimates based on local measurements and values of previous controls, from other nodes. In the paper, contrary to this, the controls are not transmitted between nodes. It leads to nonconventional filtration because the controls from other nodes are treated as random variables for each node. The cost for the additional reduced transmission is an increased filter computation at each node.
Abstract A fusion hierarchical state filtration with k−step delay sharing pattern for a multisensor system is considered. A global state estimate depends on local state estimates determined by local nodes using local information. Local available information consists of local measurements and k−step delay global information - global estimate sent from a central node. Local estimates are transmitted to the central node to be fused. The synthesis of local and global filters is presented. It is shown that a fusion filtration with k−step delay sharing pattern is equivalent to the optimal centralized classical Kalman filtration when local measurements are transmitted to the center node and used to determine a global state estimate. It is proved that the k−step delay sharing pattern can reduce covariances of local state errors.
Abstract In the paper a Lyapunov matrices approach to the parametric optimization problem of time-delay systems with a P-controller is presented. The value of integral quadratic performance index of quality is equal to the value of Lyapunov functional for the initial function of the time-delay system. The Lyapunov functional is determined by means of the Lyapunov matrix
In the paper the parametric optimization problem for a linear system with two delays and a PD-controller is presented. In the parametric optimization problem the quadratic performance index is considered. The value of the quadratic index of quality is calculated due to the Lyapunov functional and is equal to the value of that functional for the initial function of the neutral system with two delays. The Lyapunov functional is determined by means of the Lyapunov matrix.
The subject of the research is one of the largest World’s mine tailings disposal sites, i.e. Żelazny Most in the Legnica-Głogów Copper Mining District (south-western Poland), where flotation tailings are poured out after copper ore treatment. The protective hydraulic barrier made of 46 vertical drainage wells was characterized and evaluated in view of reduction of major contaminants (Cl, Na, SO4, Ca) migrating from the facility to its foreground. The efficiency of groundwater protection was determined on the basis of a new approach. In applied method the loads of characteristic and commonly recognizable compounds, i.e. salt (NaCl) and gypsum (CaSO4) were calculated, instead their chemical components. The temporal and spatial variability of captured main contaminants loads as well as its causes are discussed. The paper ends with the results of efficiency analyses of the barrier and with respect to the predicted increase in contaminant concentrations in the pulp poured out to the tailings site.
Abstract In the paper construction of a Lyapunov functional for time delay system with both lumped and distributed delay is presented. The Lyapunov functional is determined by means of the Lyapunov matrix. The method of determination of the Lyapunov matrix for time delay system with both lumped and distributed delay is presented. It is given the example illustrating the method.
This overview paper presents and compares different methods traditionally used for estimating damped sinusoid parameters. Firstly, direct nonlinear least squares fitting the signal model in the time and frequency domains are described. Next, possible applications of the Hilbert transform for signal demodulation are presented. Then, a wide range of autoregressive modelling methods, valid for damped sinusoids, are discussed, in which frequency and damping are estimated from calculated signal linear self-prediction coefficients. These methods aim at solving, directly or using least squares, a matrix linear equation in which signal or its autocorrelation function samples are used. The Prony, Steiglitz-McBride, Kumaresan-Tufts, Total Least Squares, Matrix Pencil, Yule-Walker and Pisarenko methods are taken into account. Finally, the interpolated discrete Fourier transform is presented with examples of Bertocco, Yoshida, and Agrež algorithms. The Matlab codes of all the discussed methods are given. The second part of the paper presents simulation results, compared with the Cramér-Rao lower bound and commented. All tested methods are compared with respect to their accuracy (systematic errors), noise robustness, required signal length, and computational complexity.
In this work, numerical modeling of steady state heat and mass transfer is presented. Both laminar and hydrodynamically fully developed turbulent flow in a pipe are shown. Numerical results are compared with values obtained from analytical solution of such problems. The problems under consideration are often denoted as extended Graetz problems. They occur in heat exchangers using liquid metals as working fluid, in cooling systems for electric components or in chemical process lines. Calculations were carried out gradually decreasing the mesh size in order to examine the convergence of numerical method to analytical solution.
Secure and cost-effective power generation has become very important nowdays. Care must be taken while designing and operating modern steam power plants. There are regulations such as German boiler regulations (Technische Regeln für Dampfkessel 301) or European Standards that guide the user how to operate the steam power plants. However, those regulations are based on the quasi-steady state assumption and one dimensional temperature distribution in the entire element. This simplifications may not guarantee that the heating and cooling operations are conducted in the most efficient way. Thus, it was important to find an improved method that can allow to establish optimum parameters for heating and cooling operations. The optimum parameters should guarantee that the maximum total stresses in the construction element are in the allowable limits and the entire process is conducted in the shortest time. This paper summarizes mathematical descriptions how to optimize shut down process of power block devices. The optimization formulation is based on the assumption that the maximum total stresses in the whole construction element should be kept within allowable limits during cooling operation. Additionally, the operation should be processed in the shortest time possible.
One of the major concerns of the power energy industries is a proper operation of steam power blocks. Pressurized working medium and high temperature cause very high stresses in the construction elements such as collectors, separators or steam valves. They are exposed to sudden temperature and pressure changes that cause high stresses at certain points. Additionally, the cyclic character of loading causes material fatigue, known as low-cyclic fatigue, which may lead to the formation of fracture. Thus, methodologies offered by many companies should ensure reliable and safe operation of steam power blocks. The advanced numerical solutions for determining time-optimum medium temperature changes are presented. They are based on Levenberg-Marquardt and nonlinear programming by quadratic Lagrangian methods. The methods allow us to find parameters for start-up and shut-down operation that can reduce total stresses to limits governed by European regulations. Furthermore, the heating and cooling operations are conducted in a shortest time possible.