Search results

Filters

  • Journals
  • Date

Search results

Number of results: 6
items per page: 25 50 75
Sort by:

Abstract

Various components of surface texture are identified, namely form, waviness and roughness. Separation of these components is done by digital filtering. Several problems exist during analysis of two-process surfaces. Therefore the Gaussian robust profile filtering technique was established and has been studied here. The computer generated 2D profiles and 3D surface topographies having triangular scratches as well as measured stratified surfaces were subjected to filtration. However even robust filter applications cause distortion of profiles having valleys wider than 100 μm. In order to minimize the distortion associated with wide and deep valleys, the robust filter should be modified. A special procedure was elaborated for minimizing distortion of roughness profiles caused by filtration. Application of this method to analyses of several profiles was presented. The difference between 1-D and 2-D filtering of surface topography using the same kind of filter was discussed. As a result we found that modification of a 2-D surface topography filter was not necessary.
Go to article

Abstract

The irregularity profiles of steel samples after vapour blasting were measured. A correlation analysis of profile parameters was then carried out. As the result, the following parameters were selected: Pq, Pt, PDq, Pp/Pt and Pku. Surface profiles after vapour blasting were modeled. The modeled surfaces were correctly matched to measured surfaces in 78% of all analyzed cases. The vapour blasting experiment was then carried out using an orthogonal selective research plan. The distance between the nozzle and sample d and the pressure of feed system p were input parameters; selected surface texture coefficients were output parameters. As the result of the experiment, regression equations connecting vapour blasting process parameters p and d with selected profile parameters were obtained. Finally, 2D profiles of steel samples were forecasted for various values of vapour blasting parameters. Proper matching accuracy of modeled to measured profiles was assured in 75% of analyzed cases.
Go to article

Abstract

This paper presents methods of separating the plateau part for various types of two-process profiles, having the traces of two processes. The traditional method based on the plateau-valley threshold, according to the ISO 13565-3 standard, is not always sufficient, since the valley portion can include plateau roughness. Starting and finishing points of each plateau in the measured profiles should be determined. The procedure found in the technical literature depends on setting not only the plateau-valley threshold but also a lower threshold. This approach was a little modified for profiles that contain both random and deterministic topography components. A new procedure of determination of the lower threshold was proposed for stratified profiles containing two deterministic parts. The valleys can be characterized by their widths and the distance between them. In addition, a description of the material probability curve is proposed.
Go to article

Abstract

The results of surface texture measurements obtained with the stylus equipment, white light interferometer and confocal profilometer of the same samples were compared. Machined isotropic and anisotropic surfaces, of symmetric and asymmetric ordinate distribution were measured. Forms were removed using polynomials. Sampling intervals and measuring areas during computations of parameters were the same. Discrepancies between the results obtained with various methods were observed and discussed. It was found that errors of surface texture measurement with the optical methods depend on the type of surface topography.
Go to article

Abstract

This work is focused on the issue of non-measured points – one of the most important problems in surface texture measurements using optical methods. The fundamental aim of this research is to analyse errors of surface texture measurements caused by the presence of non-measured points. This study is divided into two parts. In the first part, circles with non-measured points were artificially created on peak portions of measured surfaces. In the second part – the results of measurement by a Talysurf CCI Lite interferometer were analysed. A measurement area of 3.3 × 3.3 mm contained 1024 × 1024 points. The measurements were performed with different intensity of light. Changes of parameters regarding the analysed errors depended on a surface type. The following parameters are susceptible to errors: skewness Ssk, areal material ratio Smr, as well as the following feature parameters: Spd, Sda, Sdv, Sha and Shv. Inaccuracies of measurement in valley parts of two-process textures led usually to larger errors of parameter computations compared with deviations in peak portions.
Go to article

Abstract

In this paper distortion of surface topography measurement results by improper selection of the reference plane is taken into consideration. The following types of surfaces from cylindrical elements were analyzed: cylinder liners after plateau honing, cylinder liners with additionally burnished oil pockets and turned piston skirts. Surface topographies of these elements after a low wear process were also studied. In order to obtain areal surface topography parameters, the form was eliminated using cylinders and polynomials of the following degrees: 2, 3, 4, 6, 8, 10 and 12. Parameters of surfaces after form removal were compared. After analysis of results the reference elements for each kind of surface were recommended. A special procedure was proposed in order to select the degree of a polynomial. This method is based on surface topography changes with increase of polynomial degree. The effect of improper form elimination on measuring uncertainty was studied.
Go to article

This page uses 'cookies'. Learn more