Search results

Filters

  • Journals
  • Date

Search results

Number of results: 2
items per page: 25 50 75
Sort by:

Abstract

Mg-0.5Si-xSn (x=0.95, 2.9, 5.02wt.%) alloys were cast and extruded at 593K (320 o C) with an extrusion ratio of 25. The microstructure and mechanical properties of as-cast and extruded test alloys were investigated by OM, SEM, XRD and tensile tests. The experimental results indicate that the microstructure of the Mg-0.5Si-xSn alloys consists of primary α-Mg dendrites and an interdendritic eutectic containing α-Mg, Mg2Si and Mg2Sn. There is no coarse primary Mg2Si phase in the test alloys due to low Si content. With the increase in the Sn content, the Mg2Si phase was refined. The shape of Mg2Si phase was changed from branch to short bar, and the size of them were reduced. The ultimate tensile strength and yield strength of Mg-0.52Si-2.9Sn alloy at the temperature of 473K (200 o C) reach 133MPa and 112MPa respectively. Refined eutectic Mg2Si phase and dispersed Mg2Sn phase with good elevated temperature stability are beneficial to improve the elevated temperature performance of the alloys. However, with the excess addition of Sn, large block-like Mg2Sn appears around the grain boundary leading to lower mechanical properties.
Go to article

Abstract

This study investigates the effects of frequency, compression force and Vee angle parameters of High-Frequency Electric Resistance Welding (HF-ERW) process on mechanical properties of API X52 microalloy steel welding joint. Therefore, API X52 microalloy steel sheets having thickness of 8 mm was provided to manufacture pipes with the diameter of 16”. with direct weld seams using the HF-ERW method. During the manufacturing process, frequency values of 150, 200 and 250 kHz, compression forces of 2, 4 and 6 mark and Vee angles of 3°, 5°, and 7° were adopted. After changing the welding parameters, from the welded pipes, tensile and Charpy impact test samples prepared to macroscopically evaluate the weld metal flow and examine the effects of these parameters on mechanical properties of the welded joints. According to the results, it was concluded that frequency of 150 kHz, the compression force of 4 mark and Vee angle of 5° yields best mechanical properties in the HF-ERW joint of API X52 microalloy steel.
Go to article

This page uses 'cookies'. Learn more