The objective of this study was to determine the effect of advanced oxidation process with the use of Fenton’s reaction on the effectiveness of anaerobic treatment of wastewaters originating from the wood industry that were characterized by a high concentration of formaldehyde. Experiments were established to analyze changes in COD content and in the concentration of formaldehyde in treated wastewaters, additional analyses were carried out to assay quantitative and qualitative changes in the biogas produced. The first stage of the experiment involved analyses of the effectiveness of the tested wastewaters treatment only in the process of methane fermentation. At the second stage of the experiment, the biological process was preceded by chemical pre-treatment of wastewaters with Fenton’s reagent. The conducted study proved that the investigated variants of chemical pre-treatment of wastewaters had a significant effect on increasing the total biogas production. In contrast, no significant effect of the applied technology was demonstrated on changes in the concentration of the analyzed contaminants in the treated wastewaters.
Sewage sludge (municipal, or industrial) treatment is still a problem in so far that it is not satisfactorily resolved in terms of cost and final disposal. Two common forms of sludge disposal are possible; the first being direct disposal on land (including agriculture) and the second being incineration (ash production), although neither of these methods are universally applied. Simplifying the issue, direct sludge disposal on land is seldom applied for sanitary and environmental reasons, while incineration is not popular for financial (high costs) reasons. Very often medium and large wastewater treatment plants apply anaerobic digestion for sludge hygiene principles, reducing the amount to be disposed and for biogas (energy) production. With the progress in sewage biological treatment aiming at nutrient removal, primary sludge has been omitted in the working processes and only surplus activated sludge requires handling. Anaerobic digestion of waste activated sludge (WAS) is more difficult due to the presence of microorganisms, the decomposition of which requires a relatively long time for hydrolysis. In order to upgrade the hydrolysis effects, several different pre-treatment processes have already been developed and introduced. The additional pre-treatment processes applied are aimed at residual sludge bulk mass minimization, shortening of the anaerobic digestion process or higher biogas production, and therefore require additional energy. The water-energy-waste Nexus (treads of) of the benefits and operational difficulties, including energy costs are discussed in this paper. The intensity of pre-treatment processes to upgrade the microorganism’s hydrolysis has crucial implications. Here a low intensity pre-treatment process, alkalisation and hydrodynamic disintegration - hybrid process - were presented in order to achieve sufficient effects of WAS anaerobic digestion. A sludge digestion efficiency increase expressed as 45% biogas additional production and 52% of the total or volatile solids reduction has been confirmed.