Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 7
items per page: 25 50 75
Sort by:

Abstract

The article presents current state of the structure of hard coal enrichment plants in Poland, taking the capacity, the range of grain enrichment and the type of equipment used into account. This data were presented in a tabular format for each Polish Coal Company operating on the Polish market. The article was also present simplified: flow sheet of the steam and coking coal enrichment system. Based on the presented data, the planned needs and trends were described in terms of increasing production efficiency, minimizing water consumption and safety of work. A list of research and development works which must be undertaken were also presented as well as factors determining the technological development of the processing plants.
Go to article

Abstract

The most important and the most frequently used plastics are polyethylene (PE) and polypropylene (PP). They are characterised with high heating values (approximately 40 MJ/kg). Moreover, their chemical composition, based mainly on carbon and hydrogen, allows to use them in industrial processes. One of the methods of utilisation of plastic waste can be its use in the metallurgical industry. This paper presents results of thermal decomposition of waste PE/PP. Chemical and thermal analysis (TG) of studied wastes was carried out. Evolved gaseous products from the decomposition of wastes were indentified using mass spectrometry (TG-MS). This paper also presents an application of plastic wastes as supplemental fuel in blast furnace processes (as a substitute for coke) and as an addition in processes of coking coal.
Go to article

Abstract

In the present paper, the one-dimensional model for heat and mass transfer in fixed coal bed was proposed to describe the thermal and flow characteristics in a coke oven chamber. For the purpose of the studied problem, the analysis was limited to the calculations of temperature field and pyrolytic gas yield. In order to verify the model, its theoretical predictions for temperature distribution during wet coal charge carbonization were compared with the measurement results found in the literature. In general, the investigation shows good qualitative agreement between numerical and experimental data. However, some discrepancy regarding the temperature characteristics at the stage of evaporation was observed.
Go to article

Abstract

Over the past two years, coking coal prices have been the most volatile among major bulk commodities. On the supply side, the most important factor determining the movement of coal prices were weather problems affecting the exports of coal from Australia (Queensland), where the production of the best quality coking coals is concentrated. On the demand side, an important factor is the growing role of China on the market, which, being the world’s largest producer and consumer of metallurgical coal, has also become its largest importer. The dominant, about 75% share of China in the global spot market has resulted in their level of activity influencing the periodic price decreases or increases in international trade and prices based on CFR China (along with Australian FOB prices) have become important indicators to monitor market trends and determine levels of negotiated benchmarks. The exceptional volatility on the market led to a change in the quarterly price fixing mechanism for hard-load hard coal contractors in mid–2017 to apply a formula that assumes the valuation of their quarterly volumes based on the average of the basket of spot price indices. This reflects the broader trend of the evolving market, with growing spot market activity. The article describes the current situation on the international coking coal market and presents short-term forecasts for hard coking hard coal prices (PHCC LV), which are a reference point for fixing prices of other types of metallurgical coal (hard standard, semi-soft, PCI).
Go to article

Abstract

Studies on the quality of bituminous coal are mainly focused on physico-chemical analysis, examining the ash content, sulphur content, volatile matter content, moisture content, and the Net Calorific Value of coal. Until now, the above mentioned parameters form the basis of the Polish Standard PN-82/87002, on the basis of which individual types of bituminous coal are determined. In addition, an elemental analysis, providing information about the content of primary elements in the organic matter of solids, i.e. coal, hydrogen, nitrogen, oxygen, and sulphur, is carried out for the selected samples. This issue has been studied by many authors, which undoubtedly provide invaluable knowledge due to the huge amount of data, but, as the authors themselves indicate, the knowledge of the petrography of coal, coking properties (Probierz et al. 2012) and finally the coke obtained from individual coal types (based on tests carried out using the Karbotest installation or the so-called „box tests” performed in the coke oven battery) is still very limited. The article discusses the impact of petrographic composition on the quality of metallurgical coke. The analysis was performed using samples of coking coal from the following mines: Pniówek, Zofiówka, Borynia, and Krupiński. The mentioned coal types are used to produce coke mixtures used for the production of coke in the Przyjaźń and Radlin coking plants. Based on the rank of coal and physicochemical parameters, the mentioned coal types were classified according to the Polish classification and the UN/ECE International Classification of In-Seam Coals (UN/ECE 1995). The prediction of thermomechanical properties of coke (CSR and CRI) performed according to the original CCP method were compared with the results obtained using the classical method of Nippon Steel Corporation.
Go to article

Abstract

Over the past decade, the growing demand for imported coal from consumers (mainly Asian) coincided with supply constraints on the part of major suppliers. The sequence of events is referred to as force majeure. There were many events in the exporting countries, mainly including the cyclone and floods in Australia (Queensland, the world’s largest hard coking coal mining region). Imbalance between supply and demand causes commodity prices to be subject to cyclical changes, but in recent years the frequency and dynamics of these changes in the international metallurgical market (hard coking coal, semi-soft coking coal, PCI coal) has been extremely high. China, the world’s largest producer and consumer of coking coal, played a leading role in these events. Political action by the Chinese authorities regarding their domestic mining and metallurgical industries and the coke-chemical industry has made the country dethrone Japan since 2013 and has become a global leader in metallurgical coal imports. The rise of China’s importance in coal trading has become an important benchmark for monitoring market trends and benchmarking benchmarks. The market has become more bipolar and CFR China’s prices (in addition to Australia’s FOB prices). The paper describes the path of pricing mechanism changes in international trade contracts for metallurgical coal, against the background of market conditions that generate these changes.
Go to article

Abstract

The paper presents the correlation between the CRI (Coke Reactivity Index), CSR (Coke Strength after Reaction) and the remaining 36 quality parameters of coking coal from the Pniówek deposit (SW part of the USCB). The test results were obtained for a region of fundamental importance to the Polish reserves of coking coal, characterized by highly variable coalification and quality parameters. The tests related to the determination of relationships of the CRI and CSR indices to other parameters were based on 25 channel samples acquired from active workings. The characteristics of the variability of the CRI and CSR indices were analyzed using statistical methods. The dependencies between the CRI and CSR indices and the parameters having an impact on their values were determined using linear correlation. An attempt was also made to determine the correlations between the concerned parameters using the multiple correlation method. The obtained results have been presented and compared to the results of globally conducted experiments in the form of charts presented by (North et al. 2018b). No clear dependence of the CRI and CSR indices was exhibited in case of most of the analyzed quality parameters, which is supported by low correlation coefficients of r < 0.5. The statistical analysis exhibited only 9 cases of correlation between CRI and CSR with other quality parameters, where the correlation coefficient was r ≥ 0.5, that is: Ht a, Na2O, Al2O3 and SiO2, Mn3O4, da a and dr a. This confirms the different characteristics of coal from the studied area, exhibited multiple times, that should be related to the specific coalification process, especially the occurrence of thermal metamorphism.
Go to article

This page uses 'cookies'. Learn more