Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 60
items per page: 25 50 75
Sort by:

Abstract

Non-metallic inclusions found in steel can affect its performance characteristics. Their impact depends not only on their quality, but also, among others, on their size and distribution in the steel volume. The literature mainly describes the results of tests on hard steels, particularly bearing steels. The amount of non-metallic inclusions found in steel with a medium carbon content melted under industrial conditions is rarely presented in the literature. The tested steel was melted in an electric arc furnace and then desulfurized and argonrefined. Seven typical industrial melts were analyzed, in which ca. 75% secondary raw materials were used. The amount of non-metallic inclusions was determined by optical and extraction methods. The test results are presented using stereometric indices. Inclusions are characterized by measuring ranges. The chemical composition of steel and contents of inclusions in every melts are presented. The results are shown in graphical form. The presented analysis of the tests results on the amount and size of non-metallic inclusions can be used to assess them operational strength and durability of steel melted and refined in the desulfurization and argon refining processes.
Go to article

Abstract

Lean manufacturing [LM], quality management system and environmental management system are clear initiatives with a goal of improving effectiveness and efficiencies of organizations. Many organisations tackle lean philosophy, ISO standards individually but this kind of attempt do not focus on the synergy and the advantage from the potential collaboration. This paper aims to present the possibility of integration Lean Management concept with ISO management systems – Quality Management System [QMS] ISO 9001and Environmental Management System [EMS] ISO 14001 already implemented in the enterprises. The integration of these three concepts can be obtain due to improvement of main KPI’s defined in the organization. Based on critical research literature and participant observation presented as a case study (one of the author of the paper works as a consultant and is being implemented Lean Manufacturing concept in different organization since ten years) authors defined concept of integration of EMS and QMS (already implemented in the organization) with chosen Lean Management tools. Concept has been developed based on literature analysis and experience of the authors. Results and summary from concept implementation has been described in last chapter of the paper.
Go to article

Abstract

The paper puts forward and implements a method of designing and creating a modelling simulation environment for extensive and complete analysis of economical lighting on highways. From a general design viewpoint, the proposed solution explores the concept of a network description language (SMOL), which has been designed to describe the necessary network functions, mechanisms, and devices for the purpose of their computer simulation and verification. The presented results of the performed research confirm the usability of intelligent lighting on highways, both in the sense of the design concept and in the aspect of saving energy.
Go to article

Abstract

In wireless mobile networks, a client can move between different locations while staying connected to the network and access the remote server over the mobile networks by using their mobile de- vices at anytime and anywhere. However, the wireless network is more prone to some security attacks, as it does not have the ingrained physical security like wired networks. Thus, the client authentication is required while accessing the remote server through wireless network. Based on elliptic curve cryptosystem (ECC) and identity-based cryptography (IBC), Debiao et al. proposed an ID-based client authentication with key agreement scheme to reduce the computation and communication loads on the mobile devices. The scheme is suitable for mobile client-server environments, is secure against different attacks and provides mutual authentication with session key agreement between a client and the remote server as they claimed. Unfotunately, this paper demonstrates that Debiao et al.’s scheme is vulnerable some cryptographic attacks, and proposed an improved ID-based client authentication with key agreement scheme using ECC. The proposed scheme is secure based on Elliptic Curve Discrete Logarithm Problem (ECDLP) and Computational Diffie-Helmann Problem (CDHP). The detail analysis shows that our scheme overcomes the drawbacks of Debiao et al.’s scheme and achieves more functionality for the client authentication with lesser computational cost than other schemes.
Go to article

Abstract

This paper focuses on the radio direction finding (DF) in multipath environments. Based on the measurement results presented in the open literature, the authors analyse the influence of environment transmission properties on the spread of the signal reception angle. Parameters that define these properties are rms delay and angle spreads. For these parameters, the mutual relationship is determined. This relationship is the basis for assessment of the required number of bearings that minimize the influence of the environment on the accuracy of DF procedure. In the presented analysis, the statistical properties of the signal reception angle are approximated by the normal distribution. The number of bearings versus the rms delay spread is presented as the main objective of this paper. In addition, a methodology of the bearings’ spatial averaging that provides better estimation of the reception angle is shown.
Go to article

Abstract

Nowadays, the most popular production method for manufacturing high quality casts of aluminium alloys is the hot and cold chamber die casting. Die casts made of hypereutectoid silumin Silafont 36 AlSi9Mg are used for construction elements in the automotive industry. The influence of the metal input and circulating scrap proportion on porosity and mechanical properties of the cast has been examined and the results have been shown in this article. A little porosity in samples has not influenced the details strength and the addition of the circulating scrap has contributed to the growth of the maximum tensile force. Introducing 80% of the circulating scrap has caused great porosity which led to reduce the strength of the detail. The proportion of 40% of the metal input and 60% of the circulating scrap is a configuration safe for the details quality in terms of porosity and mechanical strength.
Go to article

Abstract

The development of economy and industry introducing new technologies and materials often means the increased threat of occurrence of factors harmful to humans and environment. Workers employed in foundries as mould pourers are the group of high professional risk. Foundry moulding sands when poured with liquid metal are a source of the emission of harmful, toxic and carcinogenic (benzene, PAHs) compounds. The paper presents the results of studies on the concentration of chemical compounds emitted in the process of casting aluminium alloy and brass using moulding sands with the new inorganic binders. The specific values of the exposure indices were compared with the limit values. This enabled an assessment of the impact of moulding sands on work environment. The obtained results were compared with the values of contaminants emitted when pouring foundry moulds made from furan sands and bentonite sands with an addition of coal dust. Studies were carried out under the project POIG.01.01.02-00-015/09 "Advanced materials and technologies."
Go to article

Abstract

In recent years, many scientific and industrial centres in the world developed virtual reality systems or laboratories. At present, among the most advanced virtual reality systems are CAVE-type (Cave Automatic Virtual Environment) installations. Such systems usually consist of four, five, or six projection screens arranged in the form of a closed or hemi-closed space. The basic task of such systems is to ensure the effect of user “immersion” in the surrounding environment. The effect of user “immersion” into virtual reality in such systems is largely dependent on optical properties of the system, especially on quality of projection of three-dimensional images. In this paper, techniques of projection of three-dimensional (3D) images in CAVE-type virtual reality systems are analysed. The requirements of these techniques for such virtual reality systems are outlined. Based on the results of measurements performed in a unique CAVE-type virtual reality laboratory equipped with two different 3D projection techniques, named Immersive 3D Visualization Lab (I3DVL), that was recently opened at the Gdańsk University of Technology, the stereoscopic parameters and colour gamut of Infitec and Active Stereo stereoscopic projection techniques are examined and discussed. The obtained results enable to estimate the projection system quality for application in CAVE-type virtual reality installations.
Go to article

Abstract

The results of estimation of home scrap addition in charge influence on durability and wear of casting instrumentation life in the highpressure casting technology using the hot chamber machine of alloy of AZ91 are presented. The wear of the following elements of the casting instrumentation so-called "casting set" as: syphon, plunger, sliding-rings, nozzle and injection moulding nozzle was estimated. A wear was estimated quantitative by registering the number of mould injections for different charges to the moment of element damage supervision. A damage had to be at such level that liquidated an element from further exploitation and necessary was an exchange on new or regeneration. In a final result allowed it the detailed determination of durability of the applied rigging elements in dependence on the type of the applied type of melt. It is noticed, that together with the increase of home-scrap participation in the charge wear of pressure machine instrumentation elements increases.
Go to article

Abstract

A forecast of the negative impact exerted on the environment by selected trace elements in “Bełchatów” Power Plant has been prepared on the basis of the results of investigations into these elements’ distribution carried out as part of earlier research on coal from “Bełchatów” Field and the data on updated analyses of the content of these elements in 55 brown coal samples from test boreholes. Work in “Bełchatów” Power Plant, which is supplied with coal from “Szczerców” Field, will be accompanied by trace elements transfer. On the basis of the conducted investigations it has been found that the biosphere is most threatened by mercury emissions. As shown by the presented results of analyses and calculations, the emissions of mercury in “Bełchatów” Power Plant are low. Mercury is accumulated chiefl y in gypsum produced in the FGD plant. The content of mercury in slag and ash is low.
Go to article

This page uses 'cookies'. Learn more