Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 149
items per page: 25 50 75
Sort by:

Abstract

The transformation of the former docks in Dublin was one of the major urban regeneration projects in Ireland, which was built during the recent economic boom. Since the start of the project in the nineties, more than six thousand apartments have been built in the area. The construction of the apartments allowed for the diversifi cation of the character of this district into a living quarter. Initially the Docklands were considered as an offi ce district that would serve the Ireland’s service-based economy. New projects also allowed for the development of housing in a close proximity to existing city centre, although it did not happen not without avoiding the gentrifi cation and social polarization of this area. The key role in the process was played by the operator – the urban development agency (Dublin Docklands Development Authority). It acted both as a strategic landowner and the coordinator of the development. The agency was responsible for the delivery of the infrastructure and the sale of the land. The actions of the operator included setting up the of the housing standards, requirements for the development of the infrastructure, both social and technical and public transportation systems. In the hindsight, the agency was praised for the management of the development of such large site. On the other hand, the lack of procedural oversight and a few dubious fi nancial decisions, as well as the other eff ects of the neoliberal policies, such as gentrification, fi nally lower the assessment of DDDA efficiency in that matter. The article summarizes the main aims and achievements of the DDDA’s development policy and its assessment from the long-term perspective of two decades of transformation. This includes the eff ects of the actions in the aftermath of the fi nancial crisis. Such perspective allows to highlight the various stages of the development of the agency and to examine the efficiency and efficacy of these actions.
Go to article

Abstract

The main objective of the article is to assess the changes in carbon dioxide emissions in residential sector caused by the implementation of the plans contained in the Air Protection Programs, anti-smog resolutions adopted in 9 voivodeships and the nationwide “Clean Air” program. The reduction of emissions of pollutants which directly affecting air quality and human health, i.e. particulate matter and benz(a)pyrene, which residential sector is the main source, can also affect the amount of emitted of carbon dioxide. To determine the changes in carbon dioxide emissions in the residential sector, emissions of CO2 in base year of 2017 from various energy carriers were determined, plans for reducing of low-stack emission were reviewed and the future structure of energy carriers used in households was estimated. The processes of increasing the efficiency of energy use through both the replacement of boilers and thermomodernization were also taken into account. The obtained results show that the highest CO2 emission reduction of 6% is achieved in case of “Clean Air” program. In frame of this program in 3.5 million of single-family houses a heating system replacement and thermomodernization is planned. Implementation of plans included on Air Protection Programs and anti-smog resolutions can lead to a relatively small (approx. 1%) reduction of CO2 compared to base year 2017. The detailed results of future fuel consumption and CO2 emission for individual voivodeships and for the whole of Poland was presented.
Go to article

Abstract

The paper investigates the supply structure of the capacity market in Poland in the coming years. The results of the capacity auctions conducted in 2018 are analyzed for this purpose. Three auctions were held at that time. The products traded in the capacity market are capacity obligations for the following years: 2021, 2022 and 2023. The auctions were organized in accordance with (i) he Act of December 8, 2017 on the Capacity Market and the (ii) Capacity Market Regulations published by the Polish Power Grid. The source of data used in this study is the official information of the President of the Energy Regulatory Office on the final results of the main auctions for 2021–2023 delivery periods. The list of the capacity suppliers who won capacity auctions contains the type of capacity market units, the volume of capacity obligations, the duration of capacity agreements and the business name of the capacity suppliers. The conducted analysis indicates that the auction for 2021 was won mainly by existing units (45.81%) and refurbishing units (33.51%). In subsequent years, the share of existing generating units is significantly higher and amounts to 91.67% for 2022 and 84.54% for 2023. The results of the study carried out in this paper also show that one energy company, being the owner of power generating daughter companies, has a very high share in these capacity auctions. The PGE Capital Group contracted 51.95% for 2021, 69.92% for 2022 and 64.44% for 2023 of the total capacity obligation. The volume amounts to over 70% of their total installed capacity.
Go to article

Abstract

The purpose of this article was to discuss the use of adsorption chillers for waste heat recovery. The introduction discusses the need to undertake broader measures for the effective management of waste heat in the industry and discusses the benefits and technical problems related to heat recovery in industrial plants. In addition, heat sources for adsorption chillers and their application examples were described. The principle of operation of adsorption chillers is explained in the next chapter. Heat sources for adsorption chillers are indicated and their application examples are described. The above considerations have allowed the benefits and technical obstacles related to the use of adsorption chillers to be highlighted. The currently used adsorbents and adsorbates are discussed later in the article. The main part of the paper discusses the use of adsorption chillers for waste heat management in the glassworks. The calculations assumed the natural gas demand of 20.1 million m3 per year and the electricity demand of 20,000 MWh/year. As a result of conducted calculations, a 231 kW adsorption chiller, ensuring the annual cold production of 2,021 MWh, was selected. The economic analysis of the proposed solution has shown that the investment in the adsorption chiller supplied with waste heat from the heat recovery system will bring significant economic benefits after 10 years from its implementation, even with total investment costs of PLN 1,900,000. However, it was noted that in order to obtain satisfactory economic results the production must meet the demand while the cost of building a heat recovery system shall not exceed PLN 1 million.
Go to article

Abstract

Hybrid Renewable Energy Systems connected to the traditional power suppliers are an interesting technological solution in the field of energy engineering and the integration of renewable systems with other energy systems can significantly increase in energy reliability. In this paper, an analysis and optimization of the hybrid energy system, which uses photovoltaic modules and wind turbines components connected to the grid, is presented. The system components are optimized using two objectives criteria: economic and environmental. The optimization has been performed based on the experimental data acquired for the whole year. Results showed the optimal configuration for the hybrid system based on economical objective, that presents the best compromise between the number of components and total efficiency. This achieved the lowest cost of energy but with relatively high CO2 emissions, while environmental objective results with lower CO2 emissions and higher cost of energy and presents the best compromise between the number of components and system net present cost. It has been shown that a hybrid system can be optimized in such a way that CO2 emission is maximally reduced and – separately – in terms of reducing the cost. However, the study shows that these two criteria cannot be optimized at the same time. Reducing the system cost increase CO2 emission and enhancing ecological effect makes the system cost larger. However, depends on strategies, a balance between different optimization criteria can be found. Regardless of the strategy used economic criteria – which also indirect takes environmental aspects as a cost of penalties – should be considered as a major criterion of optimization while the other objectives including environmental objectives are less important.
Go to article

Abstract

According to the European Environment Agency (EEA 2018), air quality in Poland is one of the worst in Europe. There are several sources of air pollution, but the condition of the air in Poland is primarily the result of the so-called low-stack emissions from the household sector. The main reason for the emission of pollutants is the combustion of low-quality fuels (mainly low-quality coal) and waste, and the use of obsolete heating boilers with low efficiency and without appropriate filters. The aim of the study was to evaluate the impact of measures aimed at reducing low-stack emissions from the household sector (boiler replacement, change of fuel type, and thermal insulation of buildings), resulting from environmental regulations, on the improvement of energy efficiency and the emission of pollutants from the household sector in Poland. Stochastic energy and mass balance models for a hypothetical household, which were used to assess the impact of remedial actions on the energy efficiency and emission of pollutants, have been developed. The annual energy consumption and emissions of pollutants were estimated for hypothetical households before and after the implementation of a given remedial action. The calculations, using the Monte Carlo simulation, were carried out for several thousand hypothetical households, for which the values of the technical parameters (type of residential building, residential building area, unitary energy demand for heating, type of heat source) were randomly drawn from probability distributions developed on the basis of the analysis of the domestic structure of households. The model takes the coefficients of correlation between the explanatory variables in the model into account. The obtained results were multiplied so that the number of hypothetical households was equal to 14.1 million, i.e. the real number of households in Poland. The obtained results allowed for identifying the potential for reducing the emission of pollutants such as carbon dioxide, carbon monoxide, dust, and nitrogen oxides, and improving the energy efficiency as a result of the proposed and implemented measures, aimed at reducing low-stack emission, resulting from the policy. The potential for emissions of gaseous pollutants is 94% for CO, 49% for NOx, 90% for dust, and 87% for SO2. The potential for improving the energy efficiency in households is around 42%.
Go to article

Abstract

The implementation of EU environmental regulations in the energy sector is challenging for the power industry of its member states. The main role is played by documents such as the Winter Package and, especially, the Directive of the European Parliament and of the Council on the emission limits of certain pollutants and the implementation of BAT conclusions in order to achieve the EU’s decarbonization objectives. These regulations impose a greater need to control harmful substances emitted to the atmosphere while using fossil fuels, including hard coal, which is the main fuel for domestic units. At the same time, the decline in domestic fossil fuel production and decrease in the quality of parameters of the hard coal makes it difficult to purchase the proper fuel for power plants. As a consequence, the costs of hard coal increase. The article presents the concept of a mathematical model that can be applied for the optimization of coal supplies. The employment of this model allows one to achieve cost reductions. One of the advantages of the proposed tool, in addition to minimizing the cost of purchase and use of hard coal, is its rational management, especially for companies producing and using hard coal.
Go to article

Abstract

The article presents the author’s considerations on the significance of the investment package diversifying natural gas supplies as part of the Northern Gate in ensuring Poland’s energy security. Data found in literature concerning the possibilities of importing the raw material by sea (terminals, gas pipelines) includes investments at various stages of concept development and construction. However, these documents lack cohesive information about a full investment package being implemented. The author has thus attempted at creating variants concerning the diversification capacities of the Republic of Poland in reference to several key offshore and onshore projects. A problem has therefore been formulated: To what extend will the Northern Gate investment package increase Poland’s energy security as a result of increased supply of natural gas from the sea? To answer this questions, researchers were forced to verify their working hypothesis which assumed that Northern Gate investments including a comprehensive package of projects had the potential of significantly improving the level of energy security in Poland by extending the possibility of importing natural gas. To solve the problem and verify the hypothesis, the researchers applied systemic analysis, deduction and variant analysis, which were used to estimate the possible import capacities of the raw material by sea. As a result of the works, the researchers created four variants including various investment projects assuming the import of 7.75 m3 to 30,95 B m3 of natural gas a year by sea. The variant which was adopted as the most probable indicates the possibility of importing 17.75 through 22.75 B m3 of gas a year, which is 111% of the average annual demand in Poland.
Go to article

Abstract

The aim of the article is to discuss and assess the diversification of renewable energy sources consumption in European Union member states. The time scope covers 2005 and 2015. The data comes from Eurostat. The analysis was based on synthetic indicators – using a non-standard method. Synthetic indicators were assessed based on three simple features such as: the share of renewable energy in energy consumption in 2015, the difference between the share of renewable energy in energy consumption in 2015 and in 2005 (in percentage points), deficit/surplus in the 2020 target reached in 2015 (in percentage points). The European Union member states were divided into four diversified group in terms of renewable energy sources consumption (first class – a very high level, second class – quite a high level, third class – quite a low level, fourth class – a very low level). Then the divided groups were analyzed according to the share of renewable energy sources in the primary production of renewable energy and the consumption of individual renewable energy sources. During the research period renewable energy consumption increased in the European Union, but individual member states are characterized by a diverse situation. The type of energy used depends largely on national resources. The countries of Northern Europe are characterized by a greater share of renewable energy sources in consumption. Biomass is the most popular renewable source of energy in the European Union. Depending on the conditions of individual countries – it is agricultural and forest biomass.
Go to article

Abstract

The natural gas supply is used from Russia Federation as a political instrument in the geopolitical and territorial conflict with Ukraine. The effectiveness of Russian strategy towards Ukraine is due to the fact that power in Kiev is also exercised by the pro-Russian politicians and supported on the part of Ukrainian oligarchs. The two countries are interdependent in terms of energy by means of the existing gas infrastructure and long-term contracts, because Ukraine guarantees the Russian Federation the transit of natural gas to Europe through its system of transmission gas pipelines, and Russia pays for the transit and used to supply the agreed amount of gas to Ukraine. For the first time – in 2016 – Ukraine didn’t import natural gas directly from the Russia Federation. This article attempts to obtain an answer to the research question, whether Ukraine actually strives to diversify its natural gas supply. What part of this policy is the Ukrainian political instrument in terms of Russia, and what part is the real political objective? Especially in the context of the gas contract between both States, ending in 2019. What role will be played the underground gas storage in the geopolitical struggle? Despite Nord Stream II the Russian Federation still needs the Ukrainian pipelines to fulfill contractual obligations in gas supplies to Europe. What are the strategic goals of the energy policy of Ukraine and Russia? The geopolitical as well as geo-economic theories will be applied. Moreover, a factor analysis as well as a decision-making analysis will be used. The political analysis method and the forecasting technique are applied to obtain, not only theoretical, but also practical input.
Go to article

Abstract

Theoretical and experimental research indicates that radial loads have a significant influence on the value of belt-on-idler rolling resistances. Computational models discussed in literature use the notion of unit rolling resistance, i.e. rolling resistance per unit length of the idler. The total value of the rolling resistance of belt on a single idler is determined by integrating unit rolling resistance with respect to the length of the contact zone between the belt and the idler. This procedure requires the knowledge of normal load distribution along the contact zone between the belt and the idler. Loads acting on the idler set have been the object of both theoretical analyses and laboratory tests. Literature mentions several models which describe the distribution of normal loads along the contact zone between the belt and the idler set (Krause & Hettler, 1974; Lodewijks, 1996; Gładysiewicz, 2003; Jennings, 2014). Numerous experimental tests (Gładysiewicz & Kisielewski, 2017; Król, 2017; Król & Zombroń, 2012) demonstrated that the resultant normal loads acting on idlers are approximate to the loads calculated in theoretical models. If the resultant normal load is known, it is possible to assume the distribution of loads acting along the contact zone between the belt and the idler. This paper analyzes various hypothetical load distributions calculated for both the center idler roll and for the side idler roll. It also presents the results of calculations of belt rolling resistances for the analyzed distributions. In addition, it presents the results of calculations with allowance for load distribution along the generating line of the idler.
Go to article

Abstract

The paper presents the results of assessment studies of the time course for technical wear in masonry buildings located in the area of mining-induced ground deformations. By using fuzzy inference system (FIS) and the “if-then” rule, corresponding language labels describing actual damage recorded in structure components were translated into scalar outputs describing the degree of damage to the building. Adopting this approach made it possible to separate damage resulting from additional effects coming from mining-induced ground deformations and the natural wear and tear of masonry structure. By using statistical analysis an exponential function for the condition of building damage and the function of natural wear and tear were developed. Both phenomena were subject to studies as a function of time regarding the technical age of building structure. The results obtained were used to develop a model for the course of technical wear of traditionally constructed buildings used within mining areas. In the course of natural wear and tear buildings located in mining areas are additionally exposed to forced ground deformations. The increase of internal forces in structure components induced by those effects results in creating an additional stress factor and damage. The hairline cracks and cracks of building structure components take place when the intensity value of mining effects becomes higher than the component stress resistance and repeated effects result in the decrease of structure rigidity. The observations of building behaviour in mining areas show that the intensity of mining activity and the multiplicity of its effect play a substantial role in the course of technical wear of buildings. The studies show that the level of damage resulting from mining effects adds up to natural wear and tear of the building and impairs the global technical condition as compared to similar buildings used outside mining areas.
Go to article

Abstract

An uniaxial compression mechanical model for the roof rock-coal (RRC) composite sample was established in order to study the effects of height ratio of roof rock to coal on the structural strength of composite sample. The composite sample strengths under different height ratios were established through stress and strain analysis of the sample extracted from the interface. The coal strength near the interface is enhanced and rock strength near the interface weakened. The structural strength of composite sample is synthetically determined by the strengths of rock and coal near and far away from the interface. The area with a low strength in composite sample is destroyed firstly. An analytical model was proposed and discussed by conducting uniaxial compression tests for sandstone-coal composite samples with different height ratios, and it was found that the structural strength and elastic modulus decrease with a decrease in height ratio. The coal strengths far away from the interface determine the structural strengths of composite sample under different height ratios, which are the main control factor for the structural strength in this test. Due to its lowest strength, the rock near the interface first experienced a tensile spalling failure at the height ratio of 9:1, without causing the structural failure of composite sample. The coal failure induces the final failure of composite sample.
Go to article

Abstract

Plastic rocks can creep, therefore the knowledge of the rheological properties of the drilled formations is an important element of the drilling process and when choosing borehole designs. These properties of plastic formations also influence the way in which appropriate drilling technology and drilling mud properties are selected. The article presents the effect of basic rheological parameters of salt from the Fore-Sudetic Monocline deposit on the drilling of boreholes in the mining area of KGHM Polska Miedź, which in the future can be used as a good drilling practice to improve the safety and efficiency of drilling. The process of drilling in plastic rocks may be hindered. Salt is a plastic rock and in the analyzed rock mass it is deposited at a considerable depth. The caprock exerts big loads on it, beside the temperature in the deposit intensifies the rheological properties of the rock. The creep process causes that the borehole contracts, therefore the knowledge about the rheological properties of the drilled rock is very important for establishing the safe time in which the well may remain uncased. The paper is devoted to the influence of basic rheological parameters of salt bed in the Fore-Sudetic Monocline on the process of drilling of a borehole in the area of KGHM Polska Miedź as these data can be used in drilling practice in the future.
Go to article

Abstract

The basis for a mineral deposit delimitation is a qualitative and quantitative assessment of deposit parameters, qualifying a deposit as an economically valuable object. A conventional approach to the mineral deposit recognition and a deposit detailed parameters qualification in the initial stages of development work in the KGHM were presented in the paper. The goals of such recognition were defined, which through a gradual detailed expansion, resulting from the information inflow, allows for the construction of a more complete decision-making model. The description of the deposit parameters proposed in the article in the context of fuzzy logic, enables a presentation of imprecise statements and data, which may be a complement to a traditional description. Selected non-adjustable and adjustable s-norm and t-norm operators were demonstrated. Operators effects were tested for selected ore quality parameters (copper content and deposit thickness) by constructing adequate membership functions. In a practical application, the use of chosen fuzzy logic operators is proposed for the assessment of the qualitative parameters of copper-silver ore in the exploitation blocks for one of the mines belonging to KGHM Polish Copper S.A. The considerations have been extended by including the possibility of using compensation operators.
Go to article

Abstract

Rockburst is a common engineering geological hazard. In order to evaluate rockburst liability in kimberlite at an underground diamond mine, a method combining generalized regression neural networks (GRNN) and fruit fly optimization algorithm (FOA) is employed. Based on two fundamental premises of rockburst occurrence, depth, σθ, σc, σt, B1, B2, SCF, Wet are determined as indicators of rockburst, which are also input vectors of GRNN model. 132 groups of data obtained from rockburst cases from all over the world are chosen as training samples to train the GRNN model; FOA is used to seek the optimal parameter σ that generates the most accurate GRNN model. The trained GRNN model is adopted to evaluate burst liability in kimberlite pipes. The same eight rockburst indicators are acquired from lab tests, mine site and FEM model as test sample features. Evaluation results made by GRNN can be confirmed by a rockburst case at this mine. GRNN do not require any prior knowledge about the nature of the relationship between the input and output variables and avoid analyzing the mechanism of rockburst, which has a bright prospect for engineering rockburst potential evaluation.
Go to article

Abstract

The cohesion and internal friction angle were characterized as quadratic functions of strain and were assumed to follow the Mohr-Coulomb criterion after the yield of peak strength. These mechanical parameters and their variations in post-peak softening stage can be exactly ascertained through the simultaneous solution based on the data points of stress-strain curves of triaxial compression tests. Taking the influence of the fault into account, the variation of strata pressure and roadway convergence with coal advancement, the temporal and spatial distribution of axial bolt load were numerically simulated by FLAC3D (Fast Lagrangian Analysis of Continua) using the ascertained post-peak mechanical parameters according to the cohesion weakening and friction strengthening model. The change mechanism of axial load of single rock bolt as abutment pressure changes was analyzed, through the comparison analysis with the results of axial bolt load by field measurements at a coal mine face. The research results show that the simulated results such as the period of main roof weighting, temporal and spatial distribution of axial bolt load are in accordance with field measurement results, so the validity of the numerical model is testified. In front of the working face, the front abutment pressure increases first and then decreases, finally tends to be stable. A corresponding correlation exists between the variation of axial bolt load and rock deformation along the bolt body. When encountered by a fault, the maximum abutment pressure, the influential range of mining disturbance and the roadway convergence between roof and floor before the working face are all increased. In the roadways along the gob, axial bolt loads on the side of the working face decrease, while the other side one increases after the collapse of the roof. As superficial surrounding rock mass is damaged, the anchoring force of rock bolts will transfer to inner rock mass for balancing the tensile load of the bolts.
Go to article

Abstract

To investigate the effect of different proximate index on minimum ignition temperature(MIT) of coal dust cloud, 30 types of coal specimens with different characteristics were chosen. A two-furnace automatic coal proximate analyzer was employed to determine the indexes for moisture content, ash content, volatile matter, fixed carbon and MIT of different types of coal specimens. As the calculated results showed that these indexes exhibited high correlation, a principal component analysis (PCA) was adopted to extract principal components for multiple factors affecting MIT of coal dust, and then, the effect of the indexes for each type of coal on MIT of coal dust was analyzed. Based on experimental data, support vector machine (SVM) regression model was constructed to predicate the MIT of coal dust, having a predicating error below 10%. This method can be applied in the predication of the MIT for coal dust, which is beneficial to the assessment of the risk induced by coal dust explosion (CDE).
Go to article

Abstract

The economic envelopes obtained by optimization techniques in open pit mining are transformed into operational phases that are suitable for extraction through ramp designs. This process is performed with the aid of specialized design software, which is still very manual, time consuming and highly dependent on the expertise of the planner. In this paper, we introduce a new methodology based on a mathematical model to automatically propose the design of ramps from the economic envelope of a pushback, with the resulting envelope having the maximum value. The developed model was tested against a real case scenario showing reasonable and useable solutions for the planner. Using this approach, a planner can evaluate several alternatives in a reasonable time before selecting the final design.
Go to article

Abstract

The study aimed to apply the protection from damage to engineering facilities located near a planned underwater aggregate extraction. The analysis was conducted in compliance with mining regulations and expert opinions. The study also aimed to assess the precision and correctness of the extraction, due to economic aspects. To reach the goals, in-situ research of the mining area was conducted, with the help of an advanced bathymetric device, based on the USV methodology. The instrument – named by the author as Smart-Sonar-Boat – was especially designed for underwater surveys in open-pit aggregate mines. The study analyzed the “Dwory” open-pit mine, located in southern Poland in the city of Oświęcim. The bathymetric results obtained contributed to improving the observation of changes in the bottom during the extraction. The applied USV method allowed for conducting the reliable evaluation of the mining work.
Go to article

Abstract

Exploitation of hard coal seams by roadway system is applied by two coal mines in southern Poland in Upper Silesian Basin. It is a secondary mining exploitation carries out in safety pillars of urban areas and shafts within mining areas of closed coal mines. Roadway system is the excavation process of gateways which are made in parallel order leaving coal pillars between them. An optimal width of coal pillar makes roadway stable and reduces subsidence of terrain surface. The article presents results of subsidence simulation caused by partial extraction using empirical and numerical methods on the example of one exploitation field of “Siltech” coal mine. The asymptotic state of subsidence was considered after mining ceased in the study area. In order to simulate of subsidence, numerical model of rock mass and model of Knothe-Budryk theory were calibrated. Simulation of vertical displacements in numerical method was carried out using RS3 program by Rocscience based on finite element method. The assumption was made that model of rock mass is transversely isotropic medium, in which panels were designed according to order of extraction of coal seams. The results of empirical and numerical methods were compared with measured values of subsidence at benchmarks along drawn lines (subsidence profiles).
Go to article

Abstract

The compactness of dimension stone blocks was previously controlled through various methods that were partially based on personal experiences, acoustic and visual observance of materials. With the development of technology, the ultrasonic pulse method is frequently used for the examination of stone test pieces and with an analysis of acquired data through the tomography method, the compactness is determined. The monolith stone blocks that are found at a site contain hidden discontinuities. The technique of data acquisition and the use of various instruments enable a good overview of the block interior. With an increased number of measurements, a suitable classification is prepared that helps reduce modification costs and increases the quality of stone blocks. The control methodology of compactness is based on the passage of longitudinal waves through the stone block without damaging the block during control. High differences in speed show irregularities in the material. With the observation system, we can prepare a tomography of the measured profiles that show us the locations of irregularities that should be observed more closely. During in situ measurements, the data for comparison with measured results are acquired. Determination of critical locations is of extreme importance before the processing of the block into smaller stone products or during the reconstruction of older stone elements or sculptures. The purpose of “in situ” measurements is to prepare a simple and fast method for the evaluation of materials compactness and for production work.
Go to article

Abstract

This work presents an innovative shaft-lining solution which, in accordance with a patent of the Republic of Poland, allows successive, periodic leaching of excess rock salt migrating to the shaft opening. As is commonly known, all workings in rock salt strata are exposed to an increased convergence of sidewalls, making it very difficult to use shafts properly. Rocks migrating towards the shaft opening cause very high stress on the shaft liner. As a result, if the lining does not show substantial deformability, it fails. Lining failure due to insufficient deformability has been extensively described in the literature. Also, throughout the history of mining construction, a number of solutions have been proposed for different types of lining-deformability enhancement. For instance, the KGHM mining corporation applied a deformable steel lining – a solution used in the mining construction of galleries – along a 155-m-long section of the SW-4 shaft with diameters of 7,5 m that passes through a rock salt strata. At KGHM, the SW-4 shaft passes through a rock salt strata along a section of 155 m, in which a deformable enclosed steel lining was made. After several years, the convergence of shaft sidewalls stabilised at a rate of 0.5 mm/day. This enormous activity of the rock mass made it necessary to reconstruct the entire shaft section after only four years. According to further predictions, it will be necessary to reconstruct this section at least four times by 2045. This paper discusses in short form the underlying weaknesses of the technology in question. As a solution to the problems mentioned above, the authors of this work present a very simple design of a shaft lining, called the tubing-aggregate lining, which utilises the leachability of salt rock massifs. The essential part of the lining is a layer of coarse aggregate set between the salt rock sidewall and the inner column of the tubing lining. One the one hand, coarse aggregate supports the salt rock sidewall and is highly deformable due to its compressibility, but on the other hand it allows water or low saturated brine to migrate and dissolve salt rock sidewalls. This paper presents the first stage of works on this subject. Patent No. PL 223831 B had been granted before these works commenced.
Go to article

Abstract

This work presents the methodology for analyzing the impact of ground vibrations induced during the drilling of gas/oil exploration wells on the surrounding constructions, as well as on humans and the natural environment. In the primary stage, this methodology is based on measurements of ground vibrations induced by a specific type of drilling system in the so-called reference site. In the next stage, ground vibrations are estimated in similar conditions to another design site, these conditions are assumed for a given drilling system, treated as a vibration source. In both sites, special seismic and geotechnical data are collected to construct numerical models for dynamic analyses. Finally, if it is required, a protection system is proposed with respect to the drilling technology and local conditions. The methodology presented has been tested on the terrain of an active natural gas mine used as the design site, and located in the southeastern part of Poland. The reference site was placed in the terrain of a working drilling system in similar conditions in the central part of Poland. Based on the results of numerical simulations, one may verify the different locations of the drilling rig in the design site with respect to the existing industrial structure. Due to the hazard from destructive ground vibrations, a certain vibroisolation system was proposed at the design site. Based on the results of numerical simulations one could rearrange the components of the drilling system in order to provide maximum security for the surrounding structures.
Go to article

Abstract

When the distribution of water quality samples is roughly balanced, the Bayesian criterion model of water-inrush source generally can obtain relatively accurate results of water-inrush source identification. However, it is often difficult to achieve desired classification results when training samples are imbalanced. Sample imbalance is common in the source identification of mine water-inrush. Therefore, we propose a three-dimensional (3D) spatial resampling method based on rare water quality samples, which achieves the balance of water quality samples. Based on the virtual water sample points distributed by the 3D grid, the method uses the 3D Inverse Distance Weighting (IDW) method to interpolate the groundwater ion concentration of the virtual water samples to achieve oversampling of rare water samples. Case study in Gubei Coal Mine shows that the method improves overall discriminant accuracy of the Bayesian criterion model by 5.26%, from 85.26% to 90.69%. In particular, the discriminative precision of the rare class is improved from 0% to 83.33%, which indicates that the method can improve the discriminant accuracy of the rare class to large extent. In addition, this method increases the Kappa coefficient of the model by 19.92%, from 52.26% to 72.19%, increasing the degree of consistency from “general” to “significant”. Our research is of significance to enriching and improving the theory of prevention and treatment of mine water damage.
Go to article

This page uses 'cookies'. Learn more