The paper investigates the supply structure of the capacity market in Poland in the coming years. The results of the capacity auctions conducted in 2018 are analyzed for this purpose. Three auctions were held at that time. The products traded in the capacity market are capacity obligations for the following years: 2021, 2022 and 2023. The auctions were organized in accordance with (i) he Act of December 8, 2017 on the Capacity Market and the (ii) Capacity Market Regulations published by the Polish Power Grid. The source of data used in this study is the official information of the President of the Energy Regulatory Office on the final results of the main auctions for 2021–2023 delivery periods. The list of the capacity suppliers who won capacity auctions contains the type of capacity market units, the volume of capacity obligations, the duration of capacity agreements and the business name of the capacity suppliers. The conducted analysis indicates that the auction for 2021 was won mainly by existing units (45.81%) and refurbishing units (33.51%). In subsequent years, the share of existing generating units is significantly higher and amounts to 91.67% for 2022 and 84.54% for 2023. The results of the study carried out in this paper also show that one energy company, being the owner of power generating daughter companies, has a very high share in these capacity auctions. The PGE Capital Group contracted 51.95% for 2021, 69.92% for 2022 and 64.44% for 2023 of the total capacity obligation. The volume amounts to over 70% of their total installed capacity.
Recently there has been a significant debate about the possible implementation of a centralized capacity mechanism in Poland. Despite the fact that capacity adequacy is currently being discussed at the national level as a long-term issue, the lack of sufficient capacity and insufficient demand flexibility has already been observed on a number of occasions. In July 2016, the Polish Ministry of Energy expressed its support for the implementation of a market-wide capacity mechanisms. In view of these recent events, the aim of this paper is to shed some light on the possible implementation of a capacity market in Poland. The paper presents a brief overview of the key problems that the Polish power sector faces and provides a comparative analysis between some of the main elements of the Polish capacity market proposal and the GB capacity market.
This paper presents an experimental analysis of flexural capacity and deformability of structural concrete slabs prepared as composite members consisting of two concrete layers made of reinforced ordinary concrete (N) and fiber reinforced concrete (SFRC). The reinforced concrete composite slabs used in the tests were prepared in the dimensions of 600 x 1200 x 80 mm. The basis was composed of two layers consisting of SFRC, one as the top layer, and one as ordinary concrete. The results of the analysis confirm a significant improvement of structural properties of the composite slab in comparison to the slabs prepared wholly of ordinary concrete.
With the upcoming implementation of the centralized capacity market in Poland, capacity auctions will be organized where domestic power companies will offer their available capacities. It is assumed that bidding will be auctioned according to the so called descending clock auction system with uniform-price (Pay-as-Clear), which will lead to the market equilibrium price. Some analysts, however, are of the view that it is more appropriate to organize capacity auctions in the Pay-as-Bid formula, as this system should lead to lower prices that those of Pay-as-Clear, hence lower costs of capacity purchase. However, this opinion does not confirm the practice – theoretical considerations do not take into account such important factors as the behavior of market players and the tendency of bidders to accept a higher risk or the lack of access to advanced analyses, and thus better information for all market participants. This paper presents a hypothetical calculation of the prices in the centralized capacity market using Monte Carlo simulations. The results of the study confirm that the price level for the Pay-as-Bid system, due to the asymmetry of information and the level of concentration of the power generation sector in Poland would lead to higher prices than for the Pay-as-Clear system on average by approximately 2.5%. The implementation of the PAB system would, therefore, be less efficient to electricity consumers.
When the machine is at high speed, serious problems occur, such as high frequency loss, difficult thermal management, and the rotor structural strength insufficiency. In this paper, the performances of two high-speed permanent magnet generators (HSP- MGs) with different rotational speeds and the same torque are compared and analyzed. The two-dimensional finite element model (FEM) of the 117 kW, 60 000 rpm HSPMG is established. By comparing a calculation result and test data, the accuracy of the model is verified. On this basis, the 40 kW, 20 000 rpm HSPMG is designed and the FEM is established. The relationship between the voltage regulation sensitivity and power factor of the two HSPMGs is determined. The influence mechanism of the voltage regulation sensitivity is further revealed. In addition, the air-gap flux density is decomposed by the Fourier transform principle, and the influence degree of different harmonic orders on the HSPMG performance is determined. The method to reduce the harmonic content is further proposed. Finally, the method to improve the HSPMG overload capacity is obtained by studying the maximum power. The research showed that the HSPMG at low speed (20 000 rpm) has high sensitivity of the voltage regulation, while the HSPMG at high speed (60 000 rpm) is superior to the HSPMG at low speed in reducing the harmonic content and increasing the overload capacity.
An efficient system of micropropagation via somatic embryogenesis from root-derived callus was established in Arabica coffee (Coffea arabica L.). Twenty-six callus lines were induced on MS (Murashige and Skoog, 1962) medium supplemented with combinations of NAA (0, 0.1, 0.5, 1 and 2 mg/L) plus BA (0, 1 and 2 mg/L), or 2,4-D (0, 0.1, 0.5, 1 and 2 mg/L) plus TDZ (0, 1 and 2 mg/L). Subsequently, two types of somatic embryos were obtained from callus cultures and named S-type and I-type embryos. The S-type embryos were obtained from an 18-monthold callus line which was induced and maintained at 2 mg/L TDZ and 0.1 mg/L 2,4-D near the end of each period of the subculture. These embryos have a developmental barrier, which did not pass through the torpedo stage and could be overcome by a supplement of 2 or 5 mg/L BA. The I-type embryos were induced from 3-month-old callus when transferred onto induction media, i.e., MS supplemented with TDZ (2 and 5 mg/L) plus 2,4-D (0 and 0.1 mg/L). The significantly highest response, i.e., 13.3 embryos per callus clump was obtained at 2 mg/L TDZ. In this study, the results reveal that TDZ has a crucial effect on embryogenic callus induction, proliferation and subsequent somatic embryogenesis.
MIMO technology has become very popular in a wireless communication system because of the many advantages of multiple antennas at the transmitting end and receiving end. The main advantages of MIMO systems are higher data rate and higher reliability without the need of extra power and bandwidth. The MIMO system provides higher data rate by using spatial multiplexing technique and higher reliability by using diversity technique. The MIMO systems have not only advantages, but also have disadvantages. The main disadvantage of MIMO system is that the multiple antennas required extra high cost RF modules. The extra RF modules increase the cost of wireless communication systems. In this research, the antenna selection techniques are proposed to minimize the cost of MIMO systems. Furthermore, this research also presents techniques for antenna selection to enhance the capacity of channel in MIMO systems.
Planning in a mining enterprise is a complex and multifaceted action. For this reason, it is necessary to provide its proper organisation and adjust it to the specific conditions of conducting underground mining extraction. The prepared plans must make up a cohesive internal system, unambiguously determining the manner, range and safety requirements of the conducted extraction. In the most general manner, the various types of plans developed by organisational units of mining enterprises can be divided based on the timeframe, type, scope and object of planning. These are strategic plans, tactical plans and subject-based plans. The aim of the article is to present the issue of production planning in a mining enterprise and for the preparation of such a plan, first and foremost, information about, among other things, applicable legal regulations, market conditions and the specificity of a mining enterprise are necessary. Underground extraction of black coal deposits must be conducted while respecting the rules of sustainable development which satisfies current needs, without compromising the ability to satisfy the needs of future generations. Due to the specific nature of mining production, manifested, among other things, by such features as the diversity of conditions for conducting the activity, resulting from the changing geological-mining conditions of the deposit, low flexibility of the production process, associated with the impossibility to conduct alternative production and a very long-lasting investment process, planning the course and magnitude of production in a mining enterprise must proceed with the highest possible diligence. One should take into account a wide range of presented environmental, organisational and technical conditions, deciding about the safety and correctness of the course of the assumed production activities. However, in order to make them economically feasible and produce satisfying results in that regard, it is also necessary to analyse them carefully with respect to financial outcomes
The evaluation of threats connected with the presence of methane in coal seams is based on our knowledge of the total content of this gas in coal. The most important parameter determining the potential of coal seams to accumulate methane is the sorption capacity of coal a. It is heavily influenced by the degree of coalification of the coal substance, determined by the vitrinite reflectance R0 or the content of volatile matter V daf. The relationship between the degree of coalification and the sorption capacity in the area of the Upper Silesian Coal Basin (USCB) has not been thoroughly investigated, which is due to the zonation of methane accumulation in this area and the considerable changeability of methane content in various localities of the Basin. Understanding this relationship call for in-depth investigation, especially since it depends on the analyzed reflectance range. The present work attempts to explain the reasons for which the sorption capacity changes along with the degree of coalification in the area of Jastrzębie (the Zofiówka Monocline). The relationship between parameters R0 and V daf was investigated. The authors also analyzed changes of the maceral composition, real density and the micropore volume. Furthermore, coalification-dependent changes in the sorption capacity of the investigated coal seams were identified. The conducted analyses have indicated a significant role of petrographic factors in relation to the accumulation properties of the seams located in the investigated area of USCB.
The paper presents the method of probabilistic optimisation of load bearing capacity and reliability of statically indeterminate bar structures, and of coupling of members in kinematically admissible failure mechanisms (KAFM), which contain minimal critical sets of elements (MCSE). The latter are characterised by the fact that if only a single element is operational, the whole set is operational too. A method of increasing load bearing capacity and reliability of KAFM built from bars dimensioned in accordance with the code is presented. The paper also shows estimation of load bearing capacity and reliability of KAFM of the optimised structures containing elastic-plastic bars with quasi-brittle connections with nodes. The necessity of increasing connection of load bearing capacity and reliability in relation to bar reliability in order to prevent bars from being excluded from MCSE due to connection fracture is estimated.
The paper provides a solution to the problem of dimensioning decisive bars on the basis of the conditions of meeting the recommended reliability classes  of statically determinate structures composed of n members. A theorem was formulated:if a statically determinate structure composed of n decisive members is to attain the reliability greater than, or equal to, the recommended relia-bility p = 1 – q, it is necessary and suffi cient that the damage frequency sum qᵢ of decisive members is smaller than the admissible damage frequency q of thestructure: ∑qᵢ < q. On the basis of this theorem, s coeffi cients that recommend increase of the load bearing capacity of the decisive bars in a statically determinate structure constructed in order to meet the recommended class  of the structure reliability, are estimated and presented in a tabular form.
The practice capacity of a railway junction depends, in addition to the effective operation’s conditions, by the potential risk factors related to the design plan of the railway station. With the aim of an approach based on the “fuzzy sets” it is possible to determine the numeric value of the practice capacity by the logic – qualitative relations between the features of the railway junction and the potential risk factors. This methodology permits to try out the absolute value of a suitable vector β, (less then the unit) for the utilization of the theoretic capacity in conditions of maximum reliability of the system related to the aspect of safety (technique “fail safe”).
The road pollutant emissions, above all in urban context, are correlated to many infrastructural parameters and to traffic intensity and typology. The research work on road junction geometry, carried out in European research centres, has recently allowed to design new road intersection types which are of undoubted interest, especially in terms of traffic functionality and safety, like the fl ower roundabouts (in which right-turn manoeuvres do not confl ict with the circulating flow). The main objective of this paper is to propose a model for the estimation the capacity, delay, levels of service and the pollutant emissions into flower roundabouts. A comparative analysis between conventional roundabout and flower roundabout has been carried out in terms of CO, CO₂, CH₄, NO, PM₂,₅ and PM10 vehicular emissions, evaluated by mean of COPERT Software which is developed as a European tool for the calculation of emissions from the road transport sector.
In the paper, a choice criterion between flower roundabouts and double-lane roundabouts is proposed, focusing on operational benefits that can derive from one scheme over the other, and outlining a general framework for benefit-cost analysis. In order to assess operational benefits of innovative roundabouts over modern roundabouts, a comparative analysis was made. Capacity was estimated using gap-acceptance models. In detail, assuming the dichotomic shifted negative exponential distribution to model headways in circulating streams, the Hagring formula was adjusted to obtain entry capacity estimations at roundabout approaches where entering vehicles face one or two conflicting flows. Based on the control delay, the suitability domains and indifference areas were constructed. Thus, a sensitivity analysis to changes in traffic demand for operational benefits of flower roundabouts over double-lane roundabouts was carried out and discussed. At last, evidence for new installations and conversion of existing roundabouts can be found.
Grey cast iron belongs to materials for casting production, which have wide application for different industry branches. Wide spectrum of properties of these materials is given by the structure of base metal matrix, which can be influenced with heat treatment. Processes of annealing can be applied for grey cast iron without problems. During heat treatment processes, where higher cooling rates are used, the thermal and structural strains become important. Usage and conditions of such heat treatment for grey cast iron castings of common production are the subject of evaluation of this article.
Paper presents the results of evaluation of heat resistance and specific heat capacity of MAR-M-200, MAR-M-247 and Rene 80 nickel superalloys. Heat resistance was evaluated using cyclic method. Every cycle included heating in 1100°C for 23 hours and cooling for 1 hour in air. Microstructure of the scale was observed using electron microscope. Specific heat capacity was measured using DSC calorimeter. It was found that under conditions of cyclically changing temperature alloy MAR-M-247 exhibits highest heat resistance. Formed oxide scale is heterophasic mixture of alloying elements, under which an internal oxidation zone was present. MAR-M-200 alloy has higher specific heat capacity compared to MAR-M-247. For tested alloys in the temperature range from 550°C to 800°C precipitation processes (γ′, γ′′) are probably occurring, resulting in a sudden increase in the observed heat capacity.
Culture gas atmosphere is one of the most important factors affecting embryo development in vitro. The main objective of this study was to compare the effects of CO concentration on the subsequent pre-implantation developmental capacity of pig embryos in vitro, including embryos obtained via parthenogenesis, in vitro fertilization (IVF), and intracytoplasmic sperm injection (ICSI). Pig embryos were developed in four different CO2 concentrations in air: 3%, 5%, 10%, or 15%. The cleavage rate of pig parthenogenetic, IVF, or ICSI embryos developed in CO2 concen- trations under 5% was the highest. There were no significant differences in the oocyte cleavage rate in ICSI embryos in CO2 concentrations under 3% and 5% (p>0.05). However, as CO2 levels increased (up to 15%) the blastocyst output on day 7, from parthenogenetic, IVF, and ICSI em- bryos, decreased to 0%. These findings demonstrate that CO2 positively affects the developmen- tal capacity of pig embryos. However, high or low CO2 levels do not significantly improve the developmental capacity of pig embryos. The best results were obtained for all of the pig embryos at a 5% CO2 concentration.
The aim of this article is to present the concept of information capacity and visual suggestiveness as a map characteristic on the example of two maps of human migration. From this viewpoint the literature study has been performed. Proposed by the author the features of cartographic visualization are an attempt to establish cartographic pragmatics and find the way to increase effectiveness of dynamic maps with large information capacity. Among the works on cartographic pragmatics, muliaspectuality of spatio-temporal data the proposed solution has not been taken so far, and refers to the map design problematic.
The EU member states have implemented excise duties on fuel and electricity according to the EU Energy Tax Directive. The purpose of these measures is to motivate a reduction in energy consumption by internalizing external costs of energy. The taxes on energy have success in inciting energy savings. Simultaneously, the price levels of energy in the EU member states have increased to levels significantly higher compared to other countries in the region and the world. The price increase is the result of a cumulative effect of excise duties and other taxes and mechanisms including feed-in tariffs and quota policies. While the Energy Tax Directive gives the member states a level of freedom in setting the exact duty rates, the minimal rates enforced on all member states are relatively high. The policy intends to limit competition between the states on low energy prices and arbitrage trading between countries. We examine the purchasing power for energy products relative to the per capita GDP for a wide set of countries countries within the EU and in the rest of the world. We can identify several groups or clusters of countries based on their GDP per capita and energy prices. The new member states of the EU face a unique combination of low or moderate GDP per capita and very high energy prices. Their relative purchasing power for energy is degraded to levels comparable or lower than the purchasing power in developing countries with significantly lower GDP per capita and underdeveloped energy infrastructure. The calibration of energy taxation in the EU at high price levels suitable for Western European economies with high per capita GDP is leading to strong negative social effects and increasing poverty in Eastern European member states. The current implementation of these policies does not recognize to a sufficient extent income levels, regional social inequalities, and the low price elasticity of demand for energy.
During studying and mathematical description of the trends of urbanized territories development as ecological and town-planning systems there were several vague similarities founded between its major parameters change periodicity and other physical values, having undulatory nature. Obtained counterparts had predetermined interest for search of fundamental basics of urbanization. It turned out that all laws of Nature has the same basis – power permanence rule. This law is known in philosophy as principle of «change of unchangeable», in ecology – as a law of ecosystem self-regulation, in accordance to which at conditions of insufficient occupancy of the territory the population amount growths, and at conditions of over-occupancy it decreases. According to research, also development attributable to the dynamics of urbanized territories is noticeable, in which all the four types of physical interactions are expressed to a certain degree. These and other results of research have allowed to articulate the main principles of ecological space «urban physics» content, which have proven to be coordinated with the postulates of new single field physics (Bishkek version). The above-mentioned have allowed to lay down the theoretical foundation for an occurrence of a new branch in the science of townplanning i.e. wave urbanistics, as a science of management by unduly processes of territories development in order to provide a conditions of their sustainable development.
The results of bearing capacity, deformability and fracture toughness of reinforced concrete beams with the external reinforcement in the form of steel cut and stretchy sheet, obtained due to the conducting of the experiment and mathematical simulation which were made of concrete of C40/50 class are given in the article. Mathematical simulation of beam structures is done on the basis of the deformation model which allows to conduct calculations of the unified methodological positions of different elements with diverse configuration of cross section and reinforcement as well as take into consideration elastic and plastic properties of concrete and reinforcement, assessing the actual stress-strain state of sections of reinforced concrete elements at different loading levels, including ultimate one. The deformation model is based on the actual diagrams use of concrete and reinforcement materials deformation and conditions of efforts balance in the normal section and hypothesis of flat sections. The theoretical value of bearing capacity and deformability, obtained as a result of the mathematical simulation was compared to the experimental data. The satisfactory coincidence of the mathematical calculation of bearing capacity, deformability, fracture toughness and experimental data gives an opportunity to use the algorithm not only for beam structures with bar reinforcement but also for beam structures with the external reinforcement in the form of steel cut and stretchy sheet.
In this article the author attempts to define the specificity of the tools for development planning at the local level in the context of: institutional resources of community (gmina) (and means of strengthening them), models of public management as well as the specifics of the Polish public administration system and its ensuing dysfunctions. These dysfunctions rely mainly on a limited awareness of the need to create mechanisms of coordination for: socio-economics, spatial and financial planning. These factors contribute to a decrease in the effectiveness of measures for the development of communities. Socio-economic planning answers the question: WHAT we want to do in the community; spatial planning: WHERE we would like to carry out certain activities, and financial planning: HOW MUCH it will cost and where the financial sources are. We can see the theoretical causal links between the areas of development planning, therefore, the main purpose of this article is to offer conceptual framework and a relevant case study of Kraków serving as its validation attempt.
Family engagement favorably influences student achievement, yet information addressing how schools and communities can effectively partner with diverse families remains lacking. This paper examines two examples that are illustrative of the some of “best” examples of parent engagement; yet they are still problematic. Using the theoretical frameworks of liberalism and postcolonial theory, this paper critiques these cases and specifically the concepts of capacity building, agency, and empowerment as they relate to urban parents’ school engagement. A critical examination of these cases yields the following conclusion and implication for researchers and practitioners alike: what might change and how might these “best” examples of parent engagement be less harmful if rather than perceiving parents as having a deficit and needing knowledge, principals, school administrators, teachers, and parents themselves capitalized on the strengths and knowledge parents already possess about their children and their communities rather than feeling obliged to dispel information and craf tparent engagement as it has traditionally been constructed and exemplified in these programs?
Multiple input multiple output (MIMO) is a multiple antenna technology used extensively in wireless communication systems. With the ever increasing demand in high data rates, MIMO system is the necessity of wireless communication. In MIMO wireless communication system, where the multiple antennas are placed on base station and mobile station, the major problem is the constant power of base station, which has to be allocated to data streams optimally. This problem is referred as a power allocation problem. In this research, singular value decomposition (SVD) is used to decouple the MIMO system in the presence of channel state information (CSI) at the base station and forms parallel channels between base station and mobile station. This practice parallel channel ensures the simultaneous transmission of parallel data streams between base station and mobile station. Along with this, water filling algorithm is used in this research to allocate power to each data stream optimally. Further the relationship between the channel capacity of MIMO wireless system and the number of antennas at the base station and the mobile station is derived mathematically. The performance comparison of channel capacity for MIMO systems, both in the presence and absence of CSI is done. Finally, the effect of channel correlation because of antennas at the base stations and the mobile stations in the MIMO systems is also measured.