During austral summer phytoplankton is the main component of food of E. superba postlarval stages. Diatomeae: Thalassiosira spp., Nitzschia spp. and tiny Pennatae constitue 98% of all consumed food particles. 91% of algae consumed were of 8—40 μm, and their mean size is 21.4 μm. The mean amount of algae found in of Euphausia superba was about 1700 per individual. The differences in species composition and the size of algae eaten by juvenes, preadult and adult individuals decrease the food competition between particular age groups of E. superba.
Porosity is one of the major defects in aluminum castings, which results is a decrease of a mechanical properties. Porosity in aluminum alloys is caused by solidification shrinkage and gas segregation. The final amount of porosity in aluminium castings is mostly influenced by several factors, as amount of hydrogen in molten aluminium alloy, cooling rate, melt temperature, mold material, or solidification interval. This article deals with effect of chemical composition on porosity in Al-Si aluminum alloys. For experiment was used Pure aluminum and four alloys: AlSi6Cu4, AlSi7Mg0, 3, AlSi9Cu1, AlSi10MgCu1.
The use of biomass in the energy industry is the consequence of ongoing efforts to replace Energy from fossil fuels with energy from renewable sources. However, due to the diversity of the biomass, its use as a solid fuel generates waste with diverse and unstable chemical composition. Waste from biomass combustion is a raw material with a very diverse composition, even in the case of using only one type of biomass. The content of individual elements in fly ash from the combustion of biomass ranges from zero to tens of percent. This makes it difficult to determine the optimal recovery methods. The ashes from the combustion of biomass are most commonly used in the production of building materials and agriculture. This article presents the elemental composition of the most commonly used biomass fuels. The results of the analysis of elemental composition of fly ashes from the combustion of forest and agricultural biomass in fluidized bed boilers used in the commercial power industry were presented. These ashes are characterized by a high content of calcium (12.3–19.4%), silicon (1.2–8.3%), potassium (0.05–1.46%), chlorine (1.1–6.1%), and iron (0.8–6.5%). The discussed ashes contained no sodium. Aluminum was found only in one of the five ashes. Manganese, chromium, copper, nickel, lead, zinc, sulfur, bismuth, titanium and zirconium were found in all of the examined ashes. The analysis of elemental composition may allow for a preliminary assessment of the recovery potential of a given ash.
Changes in the amount of basic nitrogen fractions (total, protein and non-protein nitrogen) were studied in an annual cycle. Significant seasonal changes were noted, minima occurring in Antarctic winter and maxima during spring-summer season. These changes are due mainly to high fluctuations of water content in krill in the annual cycle.
The paper is concerned with the most fundamental compositional divide to be found in lyrical discourse, consisting in that the latter one is normally split into an empirical part, presenting the author’s concrete experience, and a focal part, where the author discovers some signifi cant truth or/and changes her attitude towards the world. It is claimed in the paper that, more generally, one of the specifi c linguistic properties of focal fragments is their higher and/or specially underscored informativity, and, in particular, one of the means recruited to emphasize it is inverted word order.
The research was carried out on species diversity, density and similarity of Gastrotricha living on two species of macrophytes Myriophyllum spicatum L. and Elodea canadensis Michx. in a mesotrophic lake. Gastrotricha occurring on the studied macrophytes were represented by 23 species (21 on M. spicatum L. and 22 on E. canadensis Michx.). Species diversity (expressed by the Shannon index) for the Gastrotricha occurring on the two studied species of macrophytes amounted to 2.70 for M. spicatum L. and 2.81 for E. canadensis Michx., what suggests equal distribution of the gastrotrich species revealed in the studied species of macrophytes. The definite dominants inhabiting the two species of macrophytes were: Heterolepidoderma macrops Kisielewski, 1981, Heterolepidoderma ocellatum (Mečnikow, 1865), Lepidoderma squamata (Dujardin, 1841) and Aspidiophorus squamulosus Roszczak, 1936, and their inclusive percentage participation in the whole gastrotrich fauna for M. spicatum L. and E. canadensis Michx. was 41.8 and 40.3% respectively. The domination structure of the gastrotrich fauna of the two species of macrophytes was similar for each gastrotrich species (G-test, for all p > 0.05). Average density of Gastrotricha inhabiting M. spicatum L. amounted to 588.0 10³ indiv. m-2, and density of Gastrotricha occurring on E. canadensis Michx. amounted to 670.0 10³ indiv. m-2. Statistic analysis based on the Mann-Whitney test showed that differences of the gastrotrich densi-ty on the studied species of macrophytes: M. spicatum L. and E. canadensis Michx. (Z = -1.9282; p = 0.05) are statistically insignificant.
In this paper, the deviation from eutectic composition in boundary layer for eutectic growth is studied by phase-field method. According to a series of artificial phase diagram, the lamellar eutectic growth of these alloy is simulated during directional solidification. At steady state, average growth velocity of eutectic lamella is equal to the pulling velocity. With the increasing of the liquidus slope of β phase, the average composition in boundary layer would deviate from eutectic composition and the deviation increases. The constitutional undercooling difference between both solid phases caused by the deviation increases with the increasing of the deviation. The β phase would develop a depression under the influence of the deviation.
Applying the commonly accepted definitions of identity to landscape as our field of research, in particular landscape in protected areas, we assume that identity is the deepest relationship with the landscape (surroundings) perceived by man, with its historical layers of content (the culture and tradition of a place) and form (the canon of a place). An evaluation of change in time should be the keynote of deliberations on place identity. Basing on the current status of research, a review of specialist literature and the author’s experience to date, the above definitions and terms may be referenced to talk about “former” and “new” place identity, especially if we acquiesce to what is termed “the culture of a place” that originates in love for it and willingness to participate in the act of creation that has been launched upon the site. Author tries to explain this fenomenom on example of revitalization, on scale of conntry or even the Europe – the cultural – strategic landscape od Zamość Fortress.
Nematoda, Tardigrada, Rotifera and Crustacea composition in different freshwater habitats on Spitsbergen (Arctic) and King George Island (Antarctic) was presented. In all surveyed groups more genera and species were recorded from Spitsbergen than from King George Island. Habitats richest in taxa were moss banks and thaw ponds, whereas streams were poorest in species. In all groups in both regions cosmopolitan species dominated, but higher number of endemic species was recorded on King George Island. Regarding species composition in surveyed groups it can be suggested that freshwater habitats on Spitsbergen are more similar to each other than those on King George Island.
Changes in body mass and body reserves of Little Auks (Alle alle) were studied throughout the breeding season. Body mass loss after chick hatching was analyzed with respect to two hypotheses: (1) mass loss reflects the stress of reproduction, (2) mass loss is adaptive by reducing power consumption during flight. Body mass of both males and females increased during incubation, dropped abruptly after hatching, and remained stable until the end of the chick-rearing period. These changes were largely due to change in mass of fat reserves. Body mass, fat, and protein reserves, when corrected for body size, did not differ between sexes at the end of incubation. Female size-corrected body mass at that time was correlated with peak body mass of chicks. The estimated energy savings for flight due to the decline in adult body mass after chick hatching were small compared with the total energy expenditure of adults feedings chicks, which did not support hypothesis (2). The contribution to chick feeding was not equal; the ratio of females to males caught with food for chicks was 1.8. Size-corrected body mass during chick-rearing was lower in females, proportional to their higher chick feeding effort compared with males. Females, in contrast to males, lost protein reserves during chick-rearing. Digestive tract mass of adults increased by half throughout the breeding period. These findings supported elements of hypothesis (1). Despite high energy expenditure rates, both sexes had about 10 g of fat reserves at the end of chick feeding. Body mass of both sexes was constant during the greater part of the chick-feeding period. It was suggested therefore that mass loss is regulated with respect to lower fat reserves required during chick-rearing.
The cement production process is associated with the emission of dust. These are mainly CKD (cement kiln dust) and BPD (by-pass dust), classified as wastes from group 10 – Wastes from thermal processes, subgroups 10 and 13 – wastes from manufacture of cement, lime and plaster and articles and products made from them. Cement kiln dust is a waste of variable composition and properties, which makes it a difficult material to recover. The main directions of recovery presented in the world literature indicate the use of dust from cement kilns in cement, mortar and concrete production, the production of bricks and in order to improve soil quality and wastewater treatment. Factors affecting chemical and phase compositions of dust from cement kilns are the reason why each waste should be analyzed individually. The paper presents the results of the analysis of the cement kiln dust after dedusting cement kilns and two bypass dusts. Analysis of the chemical composition has shown significant concentrations of chlorine, potassium and calcium in all wastes. The content of: Si, S, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Zr, Pb, and Bi has also been confirmed. The analyzed dusts were characterized by the presence of carbonates (calcite, dolomite, and arcanite), quartz, alite, belite, sylvine, anhydrite, and portlandite in their phase composition. The leachates which were characterized by an alkaline reaction. In terms of leachability, high concentrations of chlorine ions in the analyzed dust leachates were confirmed, which significantly limits their use.
An important task for present and future generations is the protection of the national cultural resources. The most attractive architectural objects of historic value include palaces, manors, castles and monasteries. Less attention is paid to educational areas, which apart from the main educational and didactic goal (positive influence on the young person's mind, shaping his personality, social integration) have a great influence on his health, the quality of his life and the shape of his environment. The example of this is the park next to the school complex in Sobieszyn, located in Lublin Voivodeship, Ułęż County. The school complex with its surrounding park established at the end of the 19 th century was given by a will of the Count Kajetan Kanty Kicki, Gozdawa coat of arms, a philantropist and a contemporary owner of Sobieszyn. Localisation of the school, far away from the centre of the village, on the slope of one of the right side tributaries of the Wieprz River – Świnka, makes it an extraordinary place, emphasising the nature values that surround it. Nowadays, the building is still a school- Kajetan Kicki Agriculture School in Sobieszyn.
Physical and chemical properties of Arctic soils and especially the properties of surface horizons of the soils are very important because they are responsible for the rate and character of plant colonization, development of vegetation cover, and influence the rate and depth of thawing of soils and development of active layer of permafrost during summer. The main aim of the present study is to determine and explain the spatial diversity of selected physical and chemical properties of surface horizons of Arctic soils from the non-glaciated Fuglebekken catchment located in the Hornsund area (SW Spitsbergen) by means of geostatistical approach. Results indicate that soil surface horizons in the Fuglebekken catchment are characterized by highly variable physical and chemical properties due to a heterogeneous parent material (marine sediments, moraine, rock debris), tundra vegetation types, and non-uniform influence of seabirds. Soils experiencing the strongest influence of seabird guano have a lower pH than other soils. Soils developed on the lateral moraine of the Hansbreen glacier have the highest pH due to the presence of carbonates in the parent material and a lack or presence of a poorly developed and discontinuous A horizon. The soil surface horizons along the coast of the Hornsund exhibit the highest content of the sand fraction and SiO2. The surface of soils occurring at the foot of the slope of Ariekammen Ridge is characterized by the highest content of silt and clay fractions as well as Al2O3, Fe2O3, and K2O. Soils in the central part of the Fuglebekken catchment are depleted in CaO, MgO, and Na2O in comparison with soils in the other sampling sites, which indicates the highest rate of leaching in this part of the catchment.
Although chaetognaths inhabiting polar ecosystems are relatively well known, there are few reports on their functioning in the Antarctic coastal plankton community. The presented results provide the first comprehensive description of population structure of chaetognaths in the neritic zone west of the Antarctic Peninsula. The studies were performed on samples collected in Admiralty Bay, from December 1994 to June 1995. Following six chaetognath species were determined: Eukrohnia hamata, E. bathypelagica, E. fowleri, Pseudosagitta gazellae, P. maxima and Solidosagitta marri. The representatives of Eukrohnia were observed almost throughout the research period, whereas those of Pseudosagitta and Solidosagitta were found only during first four months of our investigation. Eukrohnia hamata showed a strong dominance in respect to abundance (max. 445 ind./1000 m3). The mean abundance of all taxa significantly fluctuated in the study period and across weeks. Generally, all species were represented by the first three maturity stages (I-III), individuals stage IV occurred sporadically, and mature specimens (stage V) were not recorded at all. Morphometric analysis of the most abundant species showed distinct differences in their total length and body proportions. Our findings may suggest that chaetognath populations in Admiralty Bay are migrant, dependent on the inflow of water from the Bransfield Strait, but to prove this statement further, round year study is necessary.
This paper presents numerical analyses and a physical experiment on efficiency of different shapes and material composition of piezo actuators on vibration reduction. For this purpose numerical models of a plate clamped on all sides with piezo actuators attached were developed. The elements used were either standard homogeneous elements or the proposed two-part elements with different material composition for inner and outer part of piezo ceramic. Numerical analyses were performed using ANSYS software
Transverse effective thermal conductivity of the random unidirectional fibre-reinforced composite was studied. The geometry was circular with random patterns formed using random sequential addition method. Composite geometries for different volume fraction and fibre radii were generated and their effective thermal conductivities (ETC) were calculated. Influence of fibre-matrix conductivity ratio on composite ETC was investigated for high and low values. Patterns were described by a set of coordination numbers (CN) and correlations between ETC and CN were constructed. The correlations were compared with available formulae presented in literature. Additionally, symmetry of the conductivity tensor for the studied geometries of fibres was analysed.
Carotenoids in six species of the lichens from Antarctica (Xanthoria eleguns, Caloplaca regalis, Usnea antarctica, U. fasciata, Himantormia lugubris and Ramalina terebrata) have been investigated by means of column and thin — layer chromatography. The following carotenoids were found: β-carotene, α- and β-cryptoxanthin, canthaxanthin. lycophyll, lycoxanthin, lutein, lutein epoxide, zeaxanthin, antheroxanthin, adonixanthin, diatoxanthin, rhodoxanthin, rhodoxanthm derivative, α-doradexanthin, astaxanthin, astaxanthin ester, mutatochrome, mutatoxanthin and cryptoflavin. Most frequently occurred β-carotene, β-cryptoxanthin, lutein epoxide, zeaxanthin and mutatoxanthin. The total carotenoid content ranged from 10.242 (Ramalina terebrata) to 18.700 mg/g dry weight (Himantormia lugubris) in October and from 4.765 (Ramalina terebrata) to 12.462 mg/g dry weight (Caloplaca regalis) in February.
In this study, free and forced vibration responses of carbon nanotube reinforced uniform and tapered composite beams are investigated. The governing differential equations of motion of a carbon nanotube (CNT) reinforced uniform and tapered composite beams are presented in finite element formulation. The validity of the developed formulation is demonstrated by comparing the natural frequencies evaluated using present FEM with those of available in literature. Various parametric studies are also performed to investigate the effect of aspect ratio, percentage of CNT content, ply orientation, and boundary conditions on natural frequencies and mode shapes of a CNT reinforced composite beam. It was observed that the addition of carbon nanotube in fiber reinforced polymer composite (FRP) beam enhances the stiffness of the structure which consequently increases the natural frequencies and alters the mode shapes.
Humic acids, isolated from selected soils of Grønfjorden area (Spitsbergen) were investigated in terms of molecular composition and resistance of decomposition. The degree of soils organic matter stabilization has been assessed with the use of modern instrumental methods (nuclear magnetic resonance spectroscopy (CP/MAS 13C-NMR). Analysis of the humic acids showed that aromatic compounds prevail in the organic matter formed in cryoconites, located on the glaciers surfaces. The predominance of aliphatic fragments is revealed in the soils in tidal zone that form on the coastal terrace. This could be caused by sedimentation of fresh organic matter exhibiting low decomposition stage due to the harsh climate and processes of hydrogenation in the humic acids, destruction of the C-C bonds and formation of chains with a high hydrogen content. These processes result in formation of aliphatic fragments in the humic acids. In general, soils of the studied region characterizes by low stabilized soil organic matter which is indicated by low aromaticity of the HAs.
The study aimed to apply the protection from damage to engineering facilities located near a planned underwater aggregate extraction. The analysis was conducted in compliance with mining regulations and expert opinions. The study also aimed to assess the precision and correctness of the extraction, due to economic aspects. To reach the goals, in-situ research of the mining area was conducted, with the help of an advanced bathymetric device, based on the USV methodology. The instrument – named by the author as Smart-Sonar-Boat – was especially designed for underwater surveys in open-pit aggregate mines. The study analyzed the “Dwory” open-pit mine, located in southern Poland in the city of Oświęcim. The bathymetric results obtained contributed to improving the observation of changes in the bottom during the extraction. The applied USV method allowed for conducting the reliable evaluation of the mining work.
Switched reluctance motors (SRMs) are still under development to maximise their already proven usefulness.Amagnetic circuit of theSRMcan be made of soft magnetic composites (SMCs). The SMCs are composed of iron powder with dielectric and have a lot of advantages in comparison to commonly used electrical steel. The paper deals with the modelling and analysis of theSRMproduced by Emerson Electric Co. forwashing machines. Numerical calculations and modelling were done using the FEMM 4.2 program. Magnetic flux densities and magnetic flux lines were calculated, as well as electromagnetic torque and inductance for changing the position of a stator to a rotor. The obtained results were compared with other measurement results and are quite similar. The developed numerical model will be used for the project of a motor with an SMC magnetic circuit.
An uniaxial compression mechanical model for the roof rock-coal (RRC) composite sample was established in order to study the effects of height ratio of roof rock to coal on the structural strength of composite sample. The composite sample strengths under different height ratios were established through stress and strain analysis of the sample extracted from the interface. The coal strength near the interface is enhanced and rock strength near the interface weakened. The structural strength of composite sample is synthetically determined by the strengths of rock and coal near and far away from the interface. The area with a low strength in composite sample is destroyed firstly. An analytical model was proposed and discussed by conducting uniaxial compression tests for sandstone-coal composite samples with different height ratios, and it was found that the structural strength and elastic modulus decrease with a decrease in height ratio. The coal strengths far away from the interface determine the structural strengths of composite sample under different height ratios, which are the main control factor for the structural strength in this test. Due to its lowest strength, the rock near the interface first experienced a tensile spalling failure at the height ratio of 9:1, without causing the structural failure of composite sample. The coal failure induces the final failure of composite sample.