Coal mining activities carried out for 200 years in Upper Silesia have had a negative effect on buildings. T his impact is in all cases related with continuous deformations of the surface and in certain cases with discontinuous deformations (mostly cave-ins), changes in water relations and mining tremors. T he paper presents an evaluation of the impact of a mining activity on a building situated in the Upper Silesian Coal Basin. T he building was affected by continuous deformations and mining tremors. Calculations were made of the values of deformation rates by means of Budryk–Knothe’s theory, which were partly verified on the basis of the results from geodetic measurements. An analysis of the velocity and acceleration of basement vibrations caused by mining-induced tremors was also conducted. T he conclusions included a high consistency between the results obtained on the basis of calculations and the values obtained by means of PGA and PGV measurements. In the case of tremors with the highest energy in the hipocentrum, there an empirical formula allowing for calculation of PGA value in given geological and mining conditions was also proposed. T he application range of the formula mentioned above is obviously limited only to the conditions in consideration. The presented conclusions indicate that at present, sufficiently precise methods, allowing for calculations for practical purposes, not only of deformation indices’ values, but also of PGV and PGA values, presently exist.
Searching and exploring the motives of continuing in the profession may be an important objective of efforts undertaken by researchers and people directly responsible for the organization and quality of work. Identifying the needs and expectations of the employee is an important element of her/his adaptation in the work environment. Because the age of life is one of the factors affecting the perception of the world and work, in this article motives of continuing professional activity in group of special educators are described in the age of life context.
In this paper results of microstructural observations for series of CuZn39Pb2 alloys produced from qualified scraps are presented. The individual alloy melts were differentiated in terms of thermal parameters of continuous casting as well as refining methods and modifications. Structural observations performed by SEM and TEM revealed formation of different types of intermetallic phases including “hard particles”. EDS results show that “hard particles” are enrich in silicon, phosphorus, iron, chromium and nickel elements. Additionally, formation of Al-Fe-Si and Al-Cr in alloy melts was observed as well. It was found that quantity and morphology of intermetallic phases strongly depends upon the chemical composition of raw materials, process parameters, modifiers and refining procedure applied during casting. It was observed that refining process results in very effective refinement of intermetallic phases, whereas modifiers, particularly carbon-based, results in formation of large particles in the microstructure.
In this article, authors analyze methods of the analysis of data integrity, security and availability loss results for business processes. Assessing those results, one can judge the importance of a process in organization; thus, determine which business process requires more attention. The importance of those processes can be determined with Business Impact Analysis (BIA). In article, first phase of BIA is presented – in specific, a construction of Business Impact Category Tables, Loss Levels and process weight calculation methods. A variety of weight calculating methods is presented. Authors also present their proposed method – square sum percentage – as a solution eliminating problems of other weight calculation methods in business impact analysis.
The article is devoted to the analysis of the lyrical poetry of Evdokiya Rostopchina, who was considered in the late 1830s – early 1840s as one of the most talented Russian poets. The main object of investigation is her strategy of self-representation. It is shown how Rostopchina builds her individual myth: the poetess treats herself as the heiress, the successor to Pushkin and Lermontov; she creates this myth, relying on the facts of her biography. She creates her own version of the romantic myth about the poet, varying the motives of the lyrics of these authors, as well as of Baratynsky’s poems. In the 1850s, trying to resist the realistic tendencies of the new era, she presents herself as the guardian of a high literary tradition and enters into a conscious confl ict with time, making literary “archaism” her own principle. If earlier she cultivated elegiac poetics, now she turns to satire.
A rigorous analysis of sound radiation by a pulsating sphere forming a resonator together with a semi-spherical cavity is presented. Both hard/soft boundaries are considered, as well as mixed. The problem is solved by dividing the entire region into two subregions, one surrounding the sphere and containing the cavity and the other for the remaining half-space. Continuity conditions are applied to obtain the acoustic pressure. Then the acoustic radiation resistance is calculated both in the near- and far-field. The acoustic radiation reactance is calculated in the impedance approach. The resonance frequencies are determined, for which a significant growth of the sound pressure level is observed as well as the sound field directivity. These rigorous results are presented in the form of highly convergent, accurate and numerically efficient series.
The positivity and absolute stability of a class of nonlinear continuous-time and discretetime systems are addressed. Necessary and sufficient conditions for the positivity of this class of nonlinear systems are established. Sufficient conditions for the absolute stability of this class of nonlinear systems are also given.
The article concerns problems with shaping contemporary housing estates. By analyzing housing structures designed in recent years, the aim was to demonstrate the importance of creating the continuity of public spaces in order to achieve places seen as attractive and presenting features of high quality urban space. Essential for the research is the question about the conditions which should be fulfi lled when creating the ideal residential place which then leads to a series of answers. These included indicating a good location with functional and aesthetic urban/architectural solutions. Environmental issues are important as well. Regardless of whether it is a multi-family dwelling or a single family house, a good neighborhood and its location in a well-connected place with necessary basic services within walking range are important. It is also signifi cant how the public space was shaped and whether a natural network was created. Due to factors such as the specifi city of the structure’s location in the city and diff erent surfaces of designed estates, as well as the variety of residential buildings being constructed, it is often diffi cult to assess them unambiguously. Importantly, this assessment also includes social and economic aspects as well as technical issues. However, by using multi-directional research it can be noted that the forms of public spaces within housing complexes play an important role in the creation of high-quality structures, perceived as attractive not only by the residents.
The paper consists the problem of developing a scientific toolkit allowing to predict the thermal state of the ingot during its formation in all elements of the casting and rolling complex, between the crystallizer of the continuous casting machine and exit from the furnace. As the toolkit for the decision making task the predictive mathematical model of the ingot temperature field is proposed. Displacement between the various elements of the CRC is accounted for by changing the boundary conditions. Mass-average enthalpy is proposed as a characteristic of ingot cross-section temperature state. The next methods of solving a number of important problems with the use of medium mass enthalpy are developed: determination of the necessary heat capacity of ingots after the continuous casting machine for direct rolling without heating; determination of the rational time of alignment of the temperature field of ingots having sufficient heat capacity for rolling after casting; determination of the total amount of heat (heat capacity) required to supply the metal for heating ingots that have insufficient amount of internal heat.
The paper analyzes the monthly day equivalent levels, Lday (06–22 h) and night equivalent levels, Lnight (22–06 h) values observed in year 2015 and 2016 for the 70 locations whereby continuous noise monitoring is conducted under the National Ambient Noise Monitoring Network (NANMN). The study exclusively analyzes the ambient noise data acquired for 25 locations in commercial zone, 12 in industrial, 16 in residential and 17 in silence zones. The analysis of (Lday–Lnight) for 70 locations under observations reveals that 10 dB night time adjustment in day-night average sound level descriptor is not appropriate in such a scenario and as such it is recommended to use day-night average sound level and day-eveningnight average sound level descriptors without any 10 dB night time adjustment or 5 dB evening time adjustments. The analysis and conclusions of the present study shall be very useful for developing single value noise descriptor correlating the noise annoyance and health effects in Indian perspectives.