Heavy metal pollutants in the leachate of waste landfill are a potential threat to the environment. In this study, the feasibility of using municipal sewage sludge as barrier material for the containment of heavy metal pollutants from solid waste landfills was evaluated by compaction test and hydraulic conductivity test concerning compaction property, impermeability and heavy metal retardation. Results of the compaction test showed that the maximum dry density of 0.79 g·cm−3 was achieved at the optimum water content of about 60%. The hydraulic conductivities of compacted sewage sludge permeated with synthetic heavy metal solutions were in the range of 1.3×10−8 – 6.2×10−9 cm·s−1, less than 1.0 ×10−7cm·s−1 recommended by regulations for barrier materials. Chemical analyses on the effluent from the hydraulic conductivity tests indicated that the two target heavy metals, Zn and Cd in the permeants were all retarded by compacted sewage sludge, which might be attributed to the precipitation and adsorption of heavy metal ions. The results of this study suggest that specially prepared material from sewage sludge could be used as a barrier for waste landfills for its low permeability and strong retardation to heavy metal pollutants.
Contamination of soil with heavy metals has become a worldwide environmental problem, and receives great attention. In this study, we aim to investigate soil pollution level affected by an industrial district nearby. The total amount of typical heavy metals in the soils (Hengyang Songmu Industrial Park, Hunan Province, China) was analyzed. In addition, the fraction analysis and laboratory simulation leaching via different pH rainwater was carried out to study the migration and transformation of heavy metals. The main results show that the contents of Cu, Zn, Pb, Cr and Cd in the samples were higher than the soil background values in Hunan Province. The heavy metals forms, analyzed by sequential extraction method, show that the proportion of the unstable form of Cd, Zn and Pb was more than 50%. Igeo values indicate that the heavy metal pollution degree of soil sample #5 at the investigated area is recorded in the order of Cd(6.42), Zn(2.28), Cu(1.82), Pb(1.63), and Cr(0.37). Cu, Zn, Pb, Cr and Cd in this area could pose a potential leaching risk to the environment which may affect the food chain and constitute a threat to human health. It would be necessary to take steps to stabilize and monitor the heavy metals in soil.
In the study suitability of water quality index approach and environmetric methods in fi ngerprinting heavy metal pollution as well as comparison of spatial variability of multiple contaminants in surface water were assessed in the case of The Gediz River Basin, Turkey. Water quality variables were categorized into two classes using factor and cluster analysis. Furthermore, soil contamination index was adapted to water pollution index and used to fi nd out the relative relationship between the reference standards and the current situation of heavy metal contamination in water. Results revealed that surface water heavy metal content was mainly governed by metal processing, textile and tannery industries in the region. On the other hand, metal processing industry discharges mainly degraded quality of water in Kemalpasa and Menemen. Furthermore, Kemalpasa region has been heavily affected from tannery and textile industries effl uents. Moreover, pollution parameters have not been infl uenced by changes in physical factors (discharge and temperature). This study indicated the effectiveness of water quality index approach and statistical tools in fi ngerprinting of pollution and comparative assessment of water quality. Both methods can assist decision makers to determine priorities in management practices.
In this study, non-sintered ceramsite was prepared using coal gasiﬁcation coarse slag obtained from a methanol plant. The basic performance and heavy metal leaching toxicity were analyzed. The results showed that seven out of nine non-sintered ceramsite groups were in accordance with the national standard of compressive strength (5 MPa), while only three groups met the national standard of water absorption index of less than 22%. The heavy metal concentrations in these three groups were found to be lower than that speciﬁed in National Class IV of surface water environment standards. The concentration of Cr was found to be 16.45 μg/L, which represents only 1% of the IV standard. The optimum mixing ratio, which showed high compressive strength (6.76 MPa) and low water absorption (20.12%), was found to be 73% coal gasiﬁcation coarse slag, 15% cement, and 12% quartz sand. The characterization using Fourier transform infrared spectroscopy showed that the formation of gelatin in ceramsite enhances the performance of the ceramsite base and increases the immobilization of heavy metal. The study proved that the preparation of non-sintered ceramsite using coal gasiﬁcation coarse slag reduces its environmental risk and achieves efﬁcient utilization of the slag. Therefore, it can be concluded that it is a feasible and environmental friendly method for the disposal of coal slag.