Ore and non-ore mineralization in cracks filled with hydrocarbons in the dark grey Upper-Devonian limestone has been found in the Józefka quarry of Upper Devonian limestone and dolomite near the Górno village near Kielce at Holy Cross Mts. Poland. Hydrocarbons in the liquid form and iron and copper sulphides appears hear in the fault zone as joints filling. The wall rocks are impregnated by hydrocarbons giving them black color. Hydrocarbon impregnations appears also following the bedding planes The coexistence of ore mineralization and hydrocarbon suggests their common origin and migration from deep-seated sources, that may be the Silurian Ordovician or Lower to Middle Devonian black shales. The metallic-hydrocarbon compounds were suggested as metals carrier. Ore and non-ore mineralization in cracks filled with hydrocarbons in the dark grey Upper-Devonian limestone has been found in the Józefka quarry of Upper Devonian limestone and dolomite near the Górno village near Kielce at Holy Cross Mts. Poland. Hydrocarbons in the liquid form and iron and copper sulphides appears hear in the fault zone as joints filling. The wall rocks are spotty impregnated by hydrocarbons giving them black color. Hydrocarbon impregnations appears also following the bedding planes The coexistence of ore mineralization and hydrocarbon suggests their common origin and migration from deep-seated sources, that may be the Silurian Ordovician or Lower to Middle Devonian black shales. The metallic-hydrocarbon compounds were suggested as metals carrier.
The contemporary underground mining of raw minerals is more and more associated with geological and mining software packages which support the work of designers from the moment of the exploration of a deposit, determination of its size and quality, geological, hydrogeological and tectonic conditions, by planning the development and cutting of the deposit. Production planning is one of the most important activities carried out in the course of a mining project, because it allows to set specific production results of a mine in relation to a time unit, and then allows for a verification of the degree of completion of the assumed plan. At present, computer-aided design is applicable to daily or long-term output planning taking deposit, qualitative, quantitative and cost constraints into account. In the article, selected forms of ore deposits were presented. On the basis of several dozen boreholes up to 300m in length, an exemplary fragment of the ore cutting model using computer-aided design of mining works was presented. By using modern computer software - ABB MineScape with modular construction, the possibilities of improving the process of development of future exploitation areas have been determined. In particular, the arrangement of boreholes, based on which ones the cross sections were made with, present the exemplary lithostratigraphic thickness of layers, including the location of discontinuous deformations in the form of faults, and an ore bearing zone. For the block model, resources with priority for metal N o. 1 and 2 were calculated. I n the last section of the article, the cutting idea for a shallow ore deposit has been presented. The degree of effective use of the deposit has been analysed for the room and pillar mining method.
The analysis of changes in the mechanical properties of wooden mining cribs under the influence of different types of exploitation loads is the question for which deals with many domestic and abroad research centers deal with. High The high interest in this subject results from the increase of the conducted depth exploitation, which contributes to the increase in both the vertical pres-sure and the complexity of geological – mining conditions and in- the intensification of natural hazards. Another reason is the tendency of decreasing the thickness of the exploited ores deposits. Wooden crib support is used Both both in underground ore, hard coal and salt mining is used wooden crib support. Mining cribs with various configurations are especially useful for the reinforcement of excavations workings behind the front and for further strengthen of the crossings. In particular, additional reinforcement support in the form of wooden cribs (pile supporting), which shall be left empty or filled with waste rock is applied in the ore mining in places where found extended rooms or drifts are found or in places with degraded roof conditions, applies additional reinforcement support in the form of wooden cribs (pile supporting), which shall be left empty or filled with waste rock. During underground ex-ploitation is produced waste Waste rock, which comes from the access, prepar-atory excavations and from ongoing field of exploitation is produced during underground exploitation. In the case of the underground exploitation of cop-per ore, waste rock is used to fill voids after exploitation as rock stowing. It is also used for filling mining wooden cribs, as an artificial support and for harder transportation roads. This paper presents the results of the laboratory strength tests performed on models of four-point timber cribs, built with beams set horizontally, at the ge-ometrical scale of 1:10. In the laboratory research Research wooden cribs models with size 200 × 200 × 200 mm and 100 × 100 × 100 mm were used in the laboratory. The paper describes the maximum loading capacity of the cribs consisted consisting only of beams and filled with waste rocks. In addition, a vertical and appropriate strain of cribs at maximum force was shown. On the basis of laboratory research it was found that the use of the same number of timbers and the management of waste rocks, the filling of the four-point cribs with the waste rocks allowed several times to increase its support to be increased several times.
The article discusses the validation process of a certain method of balancing gas contained in the pore space of rocks. The validation was based upon juxtaposition of the examination of rocks’ porosity and the effects of comminution in terms of assessing the possibility of opening the pore space. The tests were carried out for six dolomite samples taken from different areas of the ‘Polkowice-Sieroszowice’ copper mine in Poland. Prior to the grinding process, the rocks’ porosity fell in the range of 0.3-14.8%, while the volume of the open pores was included in the 0.01-0.06 cm3/g range. The grinding process was performed using an original device – the GPR analyzer. The SEM analysis revealed pores of various size and shape on the surface of the rock cores, while at the same time demonstrating lack of pores following the grinding process. The grain size distribution curves were compared with the cumulative pore volume curves of the cores before grinding. In order to confirm the argument put forward in this paper – i.e. that comminution of a rock to grains of a size comparable with the size of the rock’s pores results in the release of gas contained in the pore space – the amount of gas released as a result of the comminution process was studied. The results of gas balancing demonstrated that the pore space of the investigated dolomites was filled with gas in amounts from 3.19 cm3/kg to 45.86 cm3/kg. The obtained results of the rock material comminution to grains comparable – in terms of size – to the size of the pores of investigated rocks, along with asserting the presence of gas in the pore space of the studied dolomites, were regarded as a proof that the method of balancing gas in rocks via rock comminution is correct.
The present elaboration gives the results of investigations carried out by the VLF method in September. 1980. in Fuglebersletta, in the Hornsund Fiord area, Spitsbergen. The aim of the investigations was to localize precisely the ore-bearing veins and to trace their course.
The article describes the method of controlling the recovered grade based on measuring the intensity of volume ultrasonic oscillations and Lamb waves covering a fixed distance through the test medium and on a metal plate contacting the test medium at various time points of deliberate motion of ground materials. The authors suggest a method of determining density of ground ore particles in the pulp periodically after isolating the pulp flow in the vertical part of the measuring vessel based on measuring attenuation change values in Lamb waves covering a fixed distance on a plate contacting the medium under study and high frequency volume ultrasonic oscillations that have come through it within a certain time period. There are given dependencies of amplitudes of measuring channels based on volume ultrasonic oscillations and surface Lamb waves, size distribution according to solid phase pulp particles for various types of ores under study, a set of curves for determining the recovered grade with regard to various types of ores under study.
In 2011, the Miedzi Copper Corporation (MCC) initiated its exploration program involving deep Cu-Ag deposits in the Fore-Sudetic Monocline. A very vast study area was adopted, along with the use of a wide range of research instruments. In the years 2011–2013 the exploration of MCC involved 21 concession areas. The location of concessions for exploration as well as exploration and prospecting was based on the known prognostic and hypothetical areas with confirmed contact of the Rote Fäule facies with the reduced facies, placed in the proximity of the Zechstein elevations. In 2012 and 2013, historical boreholes drilled mainly by the petroleum industry were logged, and in cases where the preservation of rock material allowed, samples were collected for chemical analyses. Moreover, a wide range of specialized examinations was performed, involving organic chemistry, coal macerals, vitrinite reflectance and petrography, with a particular emphasis on the Rock Eval method. The latter allows the presence of the so-called strong Rote Fäule associated with the presence of the richest mineralized horizons to be established. It was equally important for the purpose of exploration to perform the reprocessing of geophysical data using the innovative method of effective reflection coefficients. This allows transforming a conventional seismic image into an impulse form of seismic records, meaning a temporal sequence of coefficients, whose sections can be correlated with the logs of historical boreholes in order to trace the course of lithological series. This method provides a much higher accuracy for determining structural elements crucial for exploration than before, suggesting the presence of various tectonic phenomena important for mineralization. As a result, a more detailed mineralization distribution model was obtained and the so-called sweet spots were pinpointed, becoming an object of further drilling exploration. The number of active concessions was reduced to 6, which resulted largely not just from the absence of ore, but also from economic premises. The drilling program initiated in 2013 and still continued today allowed the discovery and preliminary documentation of three copper and silver deposits in the Fore-Sudetic Monocline. These are the Mozów and Sulmierzyce deposits, where the presence of prospective areas was previously recorded, as well as the Nowa Sól deposit, discovered in the so-called green field, where no ore exploration was previously conducted. At the current stage of identification, each of these deposits contains resources exceeding 5 million tons of equivalent copper, and the performed economic analyses indicate the viability of their extraction using the modern methods of shaft sinking, air conditioning and waste management.
The draw theory is the foundation for decreasing ore loss and dilution indices while extracting deposits from mines. Therefore, research on draw theory is of great significance to optimally guide the draw control and improve the economy efficiency of mines. The laboratory scaled physical draw experiments under inclined wall condition conducted showed that a new way was proposed to investigate the flow zone of granular materials. The flow zone was simply divided into two parts with respect to the demarcation point of the flow axis. Based on the stochastic medium draw theory, theoretical movement formulas were derived to define the gravity flow of fragmented rocks in these two parts. The ore body with 55° dip and 10 m width was taken as an example, the particle flow parameters were fitted, and the corresponding theoretical shape of the draw body was sketched based on the derived equation of draw-body shape. The comparison of experimental and theoretical shapes of the draw body confirmed that they coincided with each other; hence, the reliability of the derived equation of particle motion was validated.
Steel and cast-iron products, due to their low price and beneficial properties, are the most widely used among metals; their consumption has become an indicator of the economic development of countries. The characteristics of iron raw materials, in relation to current metallurgical requirements, are presented in the present this article. The globalization of the trade and development of steelmaking technologies have caused significant changes in the quality of raw materials in the last half-century forcing improvements in processing technologies. In many countries, standard concentrates (at least 60% Fe) are almost twice as rich as those processed in the mid-20th century. Methods of quality assessment have been improved and quality standards tightened. The quality requirements for the most important raw materials ‒ iron ores and concentrates, steel scrap, major alloy metals, coking coal, and coke, as well as gas and other energy media ‒ are reviewed in the present paper. Particular attention is paid to the quality testing methodology. The quality of many raw materials is evaluated multi-parametrically: both chemical and physical characteristics are important. Lower-quality parameters in raw materials equate to significantly lower prices obtained by suppliers in the market. The markets for these raw materials are diversified and governed by separate sets of newly introduced rules. Price benchmarks (e.g. for standard Australian metallurgical coal) or indices (for iron concentrates) apply. Some raw materials are quoted within the framework of the commodity market system (certain alloying components and steel scrap). The abandonment of the long-established system of multi-annual contracts has led to wide fluctuations in prices, which have reached a scale similar to that of other metals.
The presented article describes the relationship between lithological and facies development of reservoir rocks in the area of the roof elevation of the Weissliegend sandstones, with a particular emphasis on the influence of elevation on the occurrence of low mineralization zones in the deposit area. To illustrate the variability of the deposit parameters, closely related to the facies and lithological conditions of the host rocks, three-dimensional lithological and geochemical models for two research areas were developed using the geostatistical methods and based on field observations and the sampling of the deposit. The research area includes parts of the Northern Elevation of Rudna and the surrounding depressions within the boundaries of the Sieroszowice and Rudna deposits. Based on cross-sections of the 3D models, a different deposit formation in the roof elevation area of sandstone formations has been characterized; the lithological profile is defined as „atypical” due to the absence of a copper-bearing shale series, the most characteristic layer for copper ore deposits in the Fore -Sudetic monocline. Large variations in the shape of the deposit and the irregular boundaries of both balance mineralization and enclaves of gangue have been confirmed. The presence of large-scale enclaves of igneous rock in the entire profile of the Lower Zechstein rocks (areas without the balance copper mineralization) and small areas of gangue (sandstone) enriched with anhydrite binders adjacent to the parts of balance deposit located in argillaceous sandstone has been revealed. The possibility of the occurrence of gangue, in the area of the roof elevation of the Weissliegend sandstones directly adjacent to the border with calcareous dolomite, and irregular gangue partings in sandstone formations in the balance deposit was indicated. In addition, small areas of strong enrichment in Cu sulphides were observed in the contact zones between sulphate and clay binders in the Weissliegend sandstone series.
The basis for a mineral deposit delimitation is a qualitative and quantitative assessment of deposit parameters, qualifying a deposit as an economically valuable object. A conventional approach to the mineral deposit recognition and a deposit detailed parameters qualification in the initial stages of development work in the KGHM were presented in the paper. The goals of such recognition were defined, which through a gradual detailed expansion, resulting from the information inflow, allows for the construction of a more complete decision-making model. The description of the deposit parameters proposed in the article in the context of fuzzy logic, enables a presentation of imprecise statements and data, which may be a complement to a traditional description. Selected non-adjustable and adjustable s-norm and t-norm operators were demonstrated. Operators effects were tested for selected ore quality parameters (copper content and deposit thickness) by constructing adequate membership functions. In a practical application, the use of chosen fuzzy logic operators is proposed for the assessment of the qualitative parameters of copper-silver ore in the exploitation blocks for one of the mines belonging to KGHM Polish Copper S.A. The considerations have been extended by including the possibility of using compensation operators.
An attempt to summarize the primary iron raw materials and steel market’s hundred years history as well as influence of economic indicators on the iron ore deposit qualification for extraction has been undertaken in the paper. Steel products are crucial to the world economy, and their production has a major impact on the environment. The main factor is the huge scale of the production and growth rate, unprecedented among minerals. Iron ore and concentrates production has increased more than thirty times over the past century, and the geological resource base at the current level of consumption has provided almost 250 years of sufficiency. There have been tremendous changes in the world geography of the ore and steel industry. The iron ore mining industry is the driver of other economic activities (land transport, freight, metallurgy) and involves huge capital and human resources. The consumption of iron raw materials is also considered as an important indicator of the countries development and current or even future economic situation. Population growth remains one of the key stimulating factors. The prices of ore and iron concentrates depend on the quality of the raw material, delivery conditions, market balance and the weight of the ordered cargo. They are usually the subject of negotiations. In the past, they were long-term contracts, while short-term (yearly, quarterly) and current spot transactions are now significant. The prices of ores and concentrates in relation to steel prices are showing a strong correlation. The average iron content of the reserves has been reduced in the largest producers in the 21st century, however it does not translate into the quality of mining output. Exploitation of the richer parts of the mineral deposit is usually carried out. The high content of iron in the output is a response to the technological requirements of the metallurgy where the blast furnace charge should contain at least 56% Fe and 5–8% FeO. The current surplus of geological-mining supply (large resource base) justifies that a mineral deposit choice, destined for excavation, is economic profit maximization as well as social and environmental considerations.
The article describes the influence of anomalous values and local variability on the structure of variability and the estimation of deposit parameters. The research was carried out using statistical and geostatistical methods based on the Pb accumulation index in the shale series in part of the Cu-Ag ore deposit, LGCD (Lubin-Głogów Copper District). The authors recommend the use of a geostatistical tool, the so-called semivariogram cloud to determine the anomalous values. Anomalous values determined by the geostatistical method and removed from the dataset have resulted in a significant reduction of the relative variability of data, which is still very large in the case of the analyzed parameter or parameters with similar statistical features such as extreme variability and strongly asymmetric distribution. Calculations of the resources of this element can be treated only as estimates and formally classified to category D. The hypothetical assumption of the absence of sampling errors, resulting in a decrease in the magnitude of local variation, leads to a certain reduction of the median error of resource estimates. However, they are still high (> 35%). This is due to the large natural variability of the accumulation index of Pb on the local observation scale. The current method for collecting samples from mine workings of the Cu-Ag deposits in the Lubin-Głogów Copper District (LGCD), aimed at the proper assessment of copper resources, the Cu content, and at estimating the quality of copper output, makes it impossible to achieve an accuracy of estimates of Pb resources similar to that obtained for the main metal. Theoretically, this effect can be achieved by a strong concentration of the sample collection points and thanks to a multiple increase in the samples weight; this, however, is unrealistic for both economic and organizational reasons. It is therefore to be expected that the assessment of Pb resources and other accompanying elements of similar statistical features (e.g. As), located in parts of the deposit where mining activities are to be carried out, will be subject to significant errors.
The article compares two models of the Church government, which since Vatican II are often in a certain antagonism in the Catholic Church. The model of „Communio” builds the Universal Church from the local church (i.e. the diocesis); the model of „Iurisdictio” (or „Hierarchy”) starts from the primacy of jurisdiction of the bishop of Rom (and separates „ordo“ and „iurisdictio”) The author proposes (with Walter Kasper) a synthesis of „iuris-dictio” and „ordo” as a theological theme for the third Christian millennium. A special place is given to the discussion of the ecclesiology of Joseph Ratzinger, who demonstrates a development from the significance of the collegiality of the episcopate to the „martyria” of the single bishop in the relation of primacy and collegiality