Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 24
items per page: 25 50 75
Sort by:

Abstract

The present paper concerns a problem of decisive criteria and their order in formwork selection problem. As the factors affecting the choice of exact form work system have been often discussed in literature, their importance has not been distinctly formulated yet, what hampers aiding formwork selection with MCDA methods that require criteria weights (eg.: SAW, TOPS IS etc.). Therefore, author ran a survey - the decisive criteria were recognized and verified within polls send to various contractors. An analysis of survey results including criteria ordering is a subject of the present elaboration.
Go to article

Abstract

Article deals with the problem of technology selection for construction project. Three criteria were proposed: cost, time and technological complexity. To solve the problem, fuzzy preference relations were used. Authors present an algorithm supporting multi-criteria decision-making process. The algorithm creates fuzzy preference relations on the basis of the fuzzy comparison: “xᵢ is better than xj”.Then, with the use of criteria weights it creates general fuzzy preference relation, finds all non-dominated (admissible) alternatives and the best one among them. The algorithm consists of 7 steps. Authors show application of the proposed algorithm – example calculations.
Go to article

Abstract

In the authors’ opinion, the issue of incorrectly functioning water insulation of foundation walls in the existing buildings in Poland is currently rather common. The paper includes a multicriteria analysis aimed at arranging the selected options of the foundation wall vertical water insulation technology in an existing model historic building using the weighted sum, entropy and AHP methods. Each of the studied solutions was evaluated in terms of the following criteria: costs of construction works, time of execution of construction works, popularity of using particular insulation options by other contractors, durability of the executed insulation and the degree of nuisance of the executed works
Go to article

Abstract

This paper presents a model of scheduling of multi unit construction project based on an NP-hard permutation flow shop problem, in which the considered criterion is the sum of the costs of the works' execution of the project considering the time of the project as a constraint. It is also assumed that each job in the units constituting the project may be realized in up to three different ways with specific time and cost of execution. The optimization task relies on solving the problem with two different decision variables: the order of execution of units (permutation) and a set of ways to carry out the works in units. The task presented in the paper is performed with the use of a created algorithm which searches the space of solutions in which metaheuristic simulated annealing algorithm is used. The paper presents a calculation example showing the applicability of the model in the optimization of sub-contractors' work in the construction project.
Go to article

Abstract

MIMO technology has become very popular in a wireless communication system because of the many advantages of multiple antennas at the transmitting end and receiving end. The main advantages of MIMO systems are higher data rate and higher reliability without the need of extra power and bandwidth. The MIMO system provides higher data rate by using spatial multiplexing technique and higher reliability by using diversity technique. The MIMO systems have not only advantages, but also have disadvantages. The main disadvantage of MIMO system is that the multiple antennas required extra high cost RF modules. The extra RF modules increase the cost of wireless communication systems. In this research, the antenna selection techniques are proposed to minimize the cost of MIMO systems. Furthermore, this research also presents techniques for antenna selection to enhance the capacity of channel in MIMO systems.
Go to article

Abstract

In the paper a research on cost-effective optimum design boiling temperature for Organic Rankine Cycle utilizing low-temperature heat sources is presented. The ratio of the heat exchanger area of the boiler to the power output is used as the objective function. Analytical relations for heat transfer area as well power of the cycle are formulated. Evaporation temperature and inlet temperature of the heat source medium as well its mass flow rate are varied in the optimization method. The optimization is carried out for three working fluids, i.e. R 134a, water and ethanol. The objective function (economics profitability, thermodynamic efficiency) leads to different optimal working conditions in terms of evaporating temperature. Maximum power generation in the near-critical conditions of subcritical ORC is the highest. The choice of the working fluid can greatly affect the objective function which is a measure of power plant cost. Ethanol exhibits a minimum objective function but not necessarily the maximum cycle efficiency.
Go to article

Abstract

The avifaunistic observations carried out in the tundra valley of the Sob River's upper course (west slopes of the Polar Ural) in July 1995 revealed the occurrence of 39 breeding and 8 non-breeding bird species. The most numerous were Anthus pratensis, Calcarius lapponicus, Phylloscopus trochilus and Anthus cervinus. The great variety of wetland and aquatic habitats had a decisive influence on species-richness and abundance of birds (jointly 30 breeding and 4 non-breeding species). Areas of low humidity were inhabited by 14 whereas anthropogenic habitats by 4 species. Most of them (except for eurytopic A. pratensis and C. lapponicus) occupied one-two habitats irrespective of their numbers. The density of Buteo lagopus was estimated at 1.67-2.00 p/10 km2. Three species of distribution ranges laying to the south from the study area, namely Bucephala clangula, Dendrocopos major, Circus macrourus, were noted in the valley. The results obtained have been compared with available data on the avifauna of the region concerned.
Go to article

Abstract

The paper presents the experience of using the ŁPrP, ŁPKO, ŁPSp, ŁPSpA i ŁPSp3R types of flattened supports for longwall entries in the conditions of the JSW S.A. Knurów-Szczygłowice coal mine. The article concentrates on the support solutions applied in the conditions of the mine and the results in terms of stability and usefulness of the structures of the supports. An analysis of the load bearing capacity and technological conditions has been conducted for various flattened supports solutions, with special consideration given to the ŁPSp and ŁPrPJ support sets. Comparing these two, the ŁPSp exhibits a load bearing capacity that is 21% higher while using 31% less steel mass. The experiment results allowed to determine that the ŁPSpA and ŁPSp3R support types are an advantageous solutions in case of longwall set-up rooms.
Go to article

Abstract

NHST (null hypothesis significance testing) is the most popular statistical paradigm in psychology. Mistakes in interpretation of its assumptions and their consequences are topic for methodological and statistical discussion for over fifty years. Article presents two problems associated with NHST that are particularly prevalent in psychology: identifying non-significant results with research failure and conducting underpowered research. They can contribute to increase in exploiting questionable research practices in order to obtain desirable, significant outcomes. Three practices: p-hacking, HARKing and selective publishing are described, along with analysis of their impact on replication crisis in psychological science.
Go to article

Abstract

This article proposes a model describing the nature of associative processes as diagnostic cues for formulating attitudes and judgments. The assumption of the model is that attitudes, judgments and behaviours are based on how people selectively activate, interpret and integrate previously associated signals (selectively limiting the excess of information from both the senses and from our immediate environment). The model specifies which factors hinder or facilitate the formulation of associations between diagnostic signals and how it translates into attitudes, judgments and behaviours. To test the predictions derived from this model, we first showed that linguistic cues of diminutives can indicate physical properties – they were associated with the belief that the described objects were smaller but also worse or less valuable. The second line of research dealt with embodied moral judgments – we demonstrated that the usage of a hand over heart gesture led to more honest behaviour, an increase in judgments of honesty but also reduced tendency to lie for one's own profit. Our findings also suggest that using “standing at attention” body manipulation increased participants' submissiveness to the experimenter and their obedience to norms. This pattern of results suggests that the described model integrates perspectives of embodied cognition and social cognition, documenting the cognitive mechanism needed to formulate and adjust attitudes and judgments.
Go to article

Abstract

Barley scald, caused by Rhynchosporium commune is one of the most prevalent diseases in barley (Hordeum vulgare L.) worldwide. The primary loss from scald is reduced yield, which can exceed 25% in dry areas. In our earlier studies, we developed a low-resolution linkage map for recombinant inbred lines of the cross Tadmor/WI2291. Quantitative trait loci (QTLs) for scald were localized on chromosomes 2H and 3H flanked by Simple Sequence Repeat (SSR) markers HVM54 and Bmac0093b on 2H and HVLTPP8, HVM62 and Bmag0006 on 3H. These chromosome 3H markers were found to be located close to the Rrs1 − R. commune resistance gene(s) on chromosome 3H. In this study, 10 homozygous resistant and 10 homozygous susceptible plants each from the F7 population of Tadmor/ Sel160, a panel of 23 barley varieties used routinely in the International Centre for Agricultural Research in the Dry Areas (ICARDA) breeding program and three populations were used for scald resistance screening using 25 DNA markers that are located very close to scald resistance gene(s) on barley chromosomes. Only five of those markers clearly discriminated co-dominantly between resistant and susceptible plants. These markers, Ebmac0871- SSR, HVS3-SCAR, Bmag0006-SSR, reside on different arms of barley chromosome 3H. Ebmac871 is localized on the short arm of 3H and HVS3 and Bmag0006 are localized on the long arm of 3H. This result indicates that the scald resistance genes which they tag are probably close to the centromeric region of this chromosome. Scald resistance from several sources map to the proximal region of the long arm of chromosome 3H, forming the complex Rrs1 locus. The availability of highly polymorphic markers for the discrimination of breeding material would be extremely useful for barley breeders to select for the trait at the DNA level rather than relying on phenotypic expression and infection reaction.
Go to article

Abstract

Eyespot is one of the most important fungal diseases of the stem base of wheat (Triticum aestivum L.). The presented study clearly demonstrated that the Pch1 gene was the main effective source for reducing the eyespot disease score in the analyzed winter wheat lines. Nevertheless, Pch1 was present only in 8−9% of the investigated lines. Using an isoenzymatic marker and molecular markers, the presence of the Pch1 gene and lack of the Pch2 gene was identified in six lines. Two lines, SMH 9409 and DL 358/13/4, were polymorphic in an isoenzymatic marker study. In the remaining three lines, C 3373/11-1, KBH 15.15 and KBP 1416, the Pch1 gene was identified only with the use of an isoenzymatic marker. Both genes Pch1 and Pch2, as well as the resistant variety Rendezvous, were found in three lines: DD 248/12, KBP 15.2 and STH 4431. In line DD 708/13, the presence of the Pch1 and Pch2 genes was identified, where the association between the Pch1 and the locus of the Xorw5 marker was broken. It was shown that the presence or absence of Pch1 and Pch2 genes did not significantly affect the grain yield (from the plot), although the yield was highest in the presence of both genes. A significant effect of the presence of the Pch1 gene on thousand kernel weight (TKW) was observed. Lines with the Pch1 gene showed significantly higher TKW values than lines without both genes or with the Pch2 gene only.
Go to article

Abstract

Optimization of encoding process in video compression is an important research problem, especially in the case of modern, sophisticated compression technologies. In this paper, we consider HEVC, for which a novel method for selection of the encoding modes is proposed. By the encoding modes we mean e.g. coding block structure, prediction types and motion vectors. The proposed selection is done basing on noise-reduced version of the input sequence, while the information about the video itself, e.g. transform coefficients, is coded basing on the unaltered input. The proposed method involves encoding of two versions of the input sequence. Further, we show realization proving that the complexity is only negligibly higher than complexity of a single encoding. The proposal has been implemented in HEVC reference software from MPEG and tested experimentally. The results show that the proposal provides up to 1.5% bitrate reduction while preserving the same quality of a decoded video.
Go to article

Abstract

Some eutectic stripes have been generated in a hexagonal (Zn) - single crystal. The stripes are situated periodically with the constant interstripes spacing. The eutectic structure in the stripes consists of strengthening inter-metallic compound, Zn16Ti, and (Zn) – solid solution. The rod-like irregular eutectic structure (with branches) appears at low growth rates. The regular lamellar eutectic structure is observed at middle growth rates. The regular rod-like eutectic structure exists exclusively in the stripes at some elevated growth rates. A new thermodynamic criterion is recommended. It suggests that this eutectic regular structure is the winner in a morphological competition for which the minimum entropy production is lower. A competition between the regular rod-like and the regular lamellar eutectic growth is described by means of the proposed criterion. The formation of branches within irregular eutectic structure is referred to the state of marginal stability. A continuous transitions from the marginal stability to the stationary state are confirmed by the continuous transformations of the irregular eutectic structure into the regular one.
Go to article

Abstract

One of the contract awarding systems in public sector in Poland is the Design & Build system. In this system, a client concludes a contract agreement with only one company, a contractor, in order to carry out both design and construction of works. While deciding on this form of delivery of a public project, the client is obliged to conduct a single proceeding aiming to select the contractor. In this paper, public works contracts awarded in the D&B system in Poland are analysed, whilst attention was put on the contracting modes and assessment criteria. The results are assessed against the experience of other countries and recommended methods for selection of the Design and Build contractor.
Go to article

Abstract

As one of the key techniques in the fully mechanized mining process, equipment selection and matching has a great effect on security, production and efficiency. The selection and matching of fully mechanized mining equipment in thin coal seam are restricted by many factors. In fully mechanized mining (FMM) faced in thin coal seams (TCS), to counter the problems existing in equipment selection, such as many the parameters concerned and low automation, an expert system (ES) of equipment selection for fully mechanized mining longwall face was established. A database for the equipment selection and matching expert system in thin coal seam, fully mechanized mining face has been established. Meanwhile, a decision-making software matching the ES was developed. Based on several real world examples, the reliability and technical risks of the results from the ES was discussed. Compared with the field applications, the shearer selection from the ES is reliable. However, some small deviations existed in the hydraulic support and scraper conveyor selection. Then, the ES was further improved. As a result, equipment selection in fully mechanized mining longwall face called 4301 in the Liangshuijing coal mine was carried out by the improved ES. Equipment selection results of the interface in the improved ES is consistent with the design proposal of the 4301 FMM working face. The reliability of the improved ES can meet the requirements of the engineering. It promotes the intelligent and efficient mining of coal resources in China.
Go to article

Abstract

According to the Grant Map of the Ministry of Development (MoD) as of March-April 2017, there were 1716 urban regeneration (revitalization) projects implemented in Poland between 2007-2013. Data from 11 voivodeships (out of 16 regions NUTS 2 in Poland) and 977 projects was sufficient to provide a representative sample (56,9% of projects presented in the Grant Map). The main methods used in the article included observation and review of MoD statistical data and literature on the subject. As observed by the author, between 2007-2013 the definition of urban regeneration (revitalization) was only mentioned in one of the footnotes to the housing guidelines, which was a poor legal basis for the regional managing authorities. Similarly, there was no solid basis in the strategic documents (national) for that period: they did not provide any definition of revitalization. It was in the interest of the beneficiaries, as well as – partly – in the interest of those managing authorities to satisfy the local needs, especially those needs which were not considered the result of the shift to the post-industrial era, but rather as a result of numerous institutional and political events. Due to these features, the period 2007-2013 was dominated by infrastructure projects aimed at the quality of life but also efficient in terms of spending European money. It seems that there was an agreement between regional managing authorities and the benefi ciaries (potential voters) as to the way of spending the revitalization funding. This was understood differently at national level, but because institutions at this level were not involved directly in the urban regeneration (revitalization), their influence on regional units was minor. Even more so because the managing authorities were also interested in speeding up the process of spending European resources.
Go to article

Abstract

Spectroscopy has become one of the most used non-invasive methods to detect plant diseases before symptoms are visible. In this study it was possible to characterize the spectral variation in leaves of Solanum lycopersicum L. infected with Fusarium oxysporum during the incubation period. It was also possible to identify the relevant specific wavelengths in the range of 380–1000 nm that can be used as spectral signatures for the detection and discrimination of vascular wilt in S. lycopersicum. It was observed that inoculated tomato plants increased their reflectance in the visible range (Vis) and decreased slowly in the near infrared range (NIR) measured during incubation, showing marked differences with plants subjected to water stress in the Vis/NIR. Additionally, three ranges were found in the spectrum related to infection by F. oxysporum (510–520 nm, 650–670 nm, 700–750 nm). Linear discriminant models on spectral reflectance data were able to differentiate between tomato varieties inoculated with F. oxysporum from healthy ones with accuracies higher than 70% 9 days after inoculation. The results showed the potential of reflectance spectroscopy to discriminate plants inoculated with F. oxysporum from healthy ones as well as those subjected to water stress in the incubation period of the disease.
Go to article

Abstract

In the last decade of the XX-th century, several academic centers have launched intensive research programs on the brain-computer interface (BCI). The current state of research allows to use certain properties of electromagnetic waves (brain activity) produced by brain neurons, measured using electroencephalographic techniques (EEG recording involves reading from electrodes attached to the scalp - the non-invasive method - or with electrodes implanted directly into the cerebral cortex - the invasive method). A BCI system reads the user's “intentions” by decoding certain features of the EEG signal. Those features are then classified and "translated" (on-line) into commands used to control a computer, prosthesis, wheelchair or other device. In this article, the authors try to show that the BCI is a typical example of a measurement and control unit.
Go to article

Abstract

In this study, the concepts of simultaneous user association and resource allocation in non-orthogonal multiple access systems have been investigated. Subscribers are randomly distributed in them. In the paper, a novel cooperative energy harvesting model is introduced so that user equipment near to the base stations acts as relay for further subscribers. In order to consider the local limitations of alternative energy resources, it was assumed that alternative energy would be shared among the base stations by means of the dynamic grid network. In this architecture, non-orthogonal resource allocation and user association frameworks should be reconfigured because conventional schemes use orthogonal multiple access. Hence, this paper suggests a novel approach to joint optimum cooperative power allocation and user association techniques to achieve a maximum degree of energy efficiency for the whole system in which the quality of experience parameters are assumed to be bounded during multi-cell multicast sessions. The model was also modified to develop joint multi-layered resource control and user association that can distinguish the service pattern in cooperative energy heterogeneous systems with non-orthogonal multiple access to obtain more resource optimality than in the current approaches. The effectiveness of the suggested approach is confirmed by numerical results. Also, the results reveal that non-orthogonal multiple access can provide greater energy efficiency than the conventional orthogonal multiple access approaches such as e.g. the MAX-SINR scheme.
Go to article

Abstract

Speech emotion recognition is deemed to be a meaningful and intractable issue among a number of do- mains comprising sentiment analysis, computer science, pedagogy, and so on. In this study, we investigate speech emotion recognition based on sparse partial least squares regression (SPLSR) approach in depth. We make use of the sparse partial least squares regression method to implement the feature selection and dimensionality reduction on the whole acquired speech emotion features. By the means of exploiting the SPLSR method, the component parts of those redundant and meaningless speech emotion features are lessened to zero while those serviceable and informative speech emotion features are maintained and selected to the following classification step. A number of tests on Berlin database reveal that the recogni- tion rate of the SPLSR method can reach up to 79.23% and is superior to other compared dimensionality reduction methods.
Go to article

Abstract

In this article, we present a comprehensive measurement system to determine the level of user emotional arousal by the analysis of electrodermal activity (EDA). A number of EDA measurements were collected, while emotions were elicited using specially selected movie sequences. Data collected from 16 participants of the experiment, in conjunction with those from personal questionnaires, were used to determine a large number of 20 features of the EDA, to assess the emotional state of a user. Feature selection was performed using signal processing and analysis methods, while considering user declarations. The suitability of the designed system for detecting the level of emotional arousal was fully confirmed, throughout the number of experiments. The average classification accuracy for two classes of the least and the most stimulating movies varies within the range of 61‒72%.
Go to article

Abstract

Optimum values of preload can be achieved in well-tried constructions and then applied in similar structures. For new structures, it is recommended to calculate the preload force and to test the correctness of calculation by means of experiments. In practice it may be necessary to introduce corrections, because not all real work parameters can be precisely known. Credibility of calculations depends, first of all, on the consistence between the assumptions concerning temperature conditions during work and elastic deformations of cooperating elements – first of all of a holder – and the real work conditions. The aim of the study is to determine how preload influences the work of a system of angular ball bearings, in relation to durability of bearing, moment of friction and rigidity of the bearing.
Go to article

Abstract

The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics. Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points. Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
Go to article

This page uses 'cookies'. Learn more