@ARTICLE{Orłowicz_A.W._A_2018, author={Orłowicz, A.W. and Tupaj, M. and Mróz, M. and Kupiec, B. and Jacek, M. and Radoń, M.}, volume={vol.18}, number={No 4}, journal={Archives of Foundry Engineering}, pages={31-34}, howpublished={online}, year={2018}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={A common problem encountered in hydraulic valves is a progressing deterioration of tightness of their water flow cutting-off seats. The seats are provided usually with a copper-alloy insert joined mechanically with cast-iron valve housing. The problem of unreliability of such joints can be solved by providing surface of the seat with a coating, deposited with the use of HVOF method and resistant to abrasive and cavitation wear. The tests were carried out for a sealing-draining seat insert made of CuZn39Pb2Al brass used to date and a specimen taken from the cast-iron valve housing which was the substrate for a plasma-sprayed coating of powder containing 86.1% Cr, 7.2% Ni, and 6.7% C. The coating, 345 ± 15 μm thick, was characterized with good quality of bonding with cast-iron substrate and high compactness of the material. The cavitation wear test on materials used in the study were carried out with the use of Vibra-Cell ultrasonic liquid processor (Sonics) equipped with a piezoelectric probe operating at the frequency of 20 kHz. Based on profilograms taken along a line crossing centers of cavitation craters, measurements of the height parameter Rt, and microscopic observations of surfaces it has been found that the coating plasma-sprayed onto substrate of nodular cast iron demonstrated higher resistance to cavitation compared to copper-alloy inserts used so far in cast-iron hydraulic valves. Cavitation craters on the material used typically for valve seats to date were more distinctly outlined and deeper compared to craters observed on the coating. Larger were also sizes of local tear-outs which resulted in larger difference between the peaks line and the valleys line.}, type={Artykuły / Articles}, title={A Possibility to Improve Resistance of Cast-iron Hydraulic Valves to Cavitation Wear}, URL={http://sd.czasopisma.pan.pl/Content/107841/PDF/AFE%204_2018_06.pdf}, keywords={Cast-iron hydraulic valves, Cavitation wear, Plasma-sprayed coating, Sealing ring}, }